Hi Imran, I think this is too simple, all you have to do is right click the compound then choose assign to CO and unselect your CP. You will have then to complete your modification by fully download the CP. Regards, Mohamed Abbas On 9/16/07, Imran Waheed Butt <butt.imran@xxxxxxxxx> wrote: > Dear List, > In IACC how we can delete any particular compound/block form CP only, not > from the IACC database. > Kindly advise me, or there is other method for it. > > Thanks and Best Regards, > Imran Butt. > System Engineer. > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
