Look at the cassandra website. There is a little app called 'makeaatab' that may work for you. I did find some people for whom it didn't work but you might give it a go just in case. ----- Original Message ----- From: <Maneesh.Agrawal@xxxxxxxxxxxx> To: <foxboro@xxxxxxxxxxxxx> Sent: Friday, May 28, 2004 1:39 PM Subject: [foxboro] Help sought on configuring Alarm table from Alarm Panel > hi list, > Does anybody have any simple scripts/utilities to generate the alarm table > file from the alarm panel configuration, in Display Manager.We have around > 50-60 displays and need to make the alarm table and were thinking of the > possibility of some scripts so that our work would be easier. > > Thanks & Regards, > Maneesh Agrawal, > Systems Engineer,Invensys Middle East,Kuwait Operations. > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave