Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- From: Mike_Adams@xxxxxxxxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 1 Aug 2007 11:04:13 -0400
Corey wrote:
>...There are two outputs, but I think they are always inverses of
> each other or something (I can't recall ever using COUT_2).
Use the INVCO1 and INVCO2 parameters to control which state they go to.
Very useful.
Mike Adams
Mitsubishi Polyester Film, LLC
Greer SC USA
864-879-5231
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?
- » Re: [foxboro] "GDEV" or "VLV,MOVLV,MTR" or "CALC" - Discrete control engineering advice ?