Ken: omget is one way to do what you want. Other ways: 1)As long as you don't have IEE (aka IDE) you can use the ICCAPI via = driver task script. (Refer to document B0193NE to learn how to do this.) 2)You could use icc_print to build a file with all the parameters of = your block then you could strip out the info you are interested in using = a script. (Refer to document B0193AV) Again this only works if you don't = have IEE. If you have IEE then you will have to try the omget method. Good luck Peter -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Moore, Kenneth, Celanese/US Sent: Wednesday, August 01, 2007 8:19 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] GDEV ignore limits listing Hi List, Novice here, so be gentle. I took a quick look through the archives, but didn't find what I was looking for. I need to generate a list of all GDEV blocks that have limits configured, but are ignored. I assume I need to use the OMGET, I'll have to read up on that topic. =3D20 Regards, Ken Moore Process Controls Specialist Celanese Emulsions Enoree, SC 29335 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave