Try to change the default gateway to the ip address of the ethernet switch between the fdsi and Plc. No idea about the ? within XML file. Marc Sent from my iPhone Marc L. Hunter Synergy On Apr 27, 2012, at 10:39 AM, "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx> wrote: > Marc, > > Thanks for the leads... > > I have tried a variety of DVOPTS, including the basic "EIP/CLX" out to > "EIP/CLX+@22+TO=5+SN=0". > > I have a also tried a variety of Network configurations (with and without > the SubnetMask and DefaultGateway), the latest being (I just noticed the "?" > in the 1st line): > <?xml version="1.0"?> > -<FBM232 Type="FBMPortLib.FBM232PortCtrl" Assembly="FBMPortLib.dll"> > -<Port> > -<Main> > <IPAddress>192.168.1.105</IPAddress> > <SubnetMask>255.255.255.0</SubnetMask> > <DefaultGateway>255.255.255.254</DefaultGateway> > </Main> > </Port> > </FBM232> > > Any guesses what the "?" in the 1st line means? > > Yes, the downloads appear to work because I can see the file names and > details in the SMDH Equip Info displays. > > Joseph M. Riccardi > > 386-441-0250 Office > 386-451-7607 Cell > > Joe@xxxxxxxxxxxxx > > "To give real service you must add something that cannot be bought or > measured with money; and that is sincerity and integrity." - Donald A. Adams > > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On > Behalf Of Marc Hunter > Sent: Friday, April 27, 2012 12:40 PM > To: foxboro@xxxxxxxxxxxxx > Cc: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] FBM232 FDSI Configurator > > Joe, > > Try to change your DVOPTS parameter to "EIP/CLX". > > Also do you have a gateway defined on the FDSI XML file? > > When you do the soft download and general download, does sysmon give > information about the driver on the child ecb's? > > Marc > > Sent from my iPhone > > Marc L. Hunter > Synergy > > > On Apr 27, 2012, at 8:59 AM, "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx> wrote: > >> My FDSI God, my God, why hast thou forsaken me? >> I appreciate the help from the list so far and I have made some progress. >> But after 2 days I still cannot communicate to 2 ControlLogix PLCs; FCP270 >> >> FBM232 > ECB200 > ECB201 for each PLC. >> >> I have the ECB200s communicating and on-line but I cannot get the ECB201s > to >> work. As soon as I Enable Communications they fail. Below are the ECB >> listings. Just FYI: >> * As near as I and our Elite Team of 4 can tell, we have followed all >> procedures and instructions despite some confusing and conflicting >> documentation. >> * My focus has been on the DEV_ID because that is where much of the >> confusing and conflicting documentation exists. It is also the Parameter > on >> the Select Display for the ECB201 blocks that is highlighted in red along >> with the ECB Status (DEV FAIL) field. The other fields are a variety of >> greens and cyans. >> * To the best of our abilities, the variety of *.xml files have been >> created and downloaded properly. The names and details do show up in the >> SMDH Equip Info displays. >> * We have tried a variety of variations of ECB parameters and we have >> also tried unsuccessfully with and without a point and block configured. >> * I can ping the 2 FBM232s and the 2 PLCs. >> * In desperation I have Deleted and Undeleted everything; more than >> once. In further desperation I have even rebooted everything; more than >> once. >> >> Before I hang myself, does anyone see something wrong with the ECB >> configurations, or have any suggestions? >> >> Integrated Control Configurator >> Configuration = PC5AXX >> Fri Apr 27 10:43:18 2012 >> >> PC5AXX_ECB:PRIMARY_ECB >> >> NAME PRIMARY_ECB >> TYPE ECBP >> DESCRP >> NRBUS 2 >> BUSOPT 3 >> BUSTYP R >> PIOWDT 250 >> MPOLL 7 >> FIBER 0 >> BADALM 0 >> >> PC5AXX_ECB:PC5A03 >> >> NAME PC5A03 >> TYPE ECB200 >> DESCRP FBM232 LHM PLC >> PERIOD 1 >> PHASE 0 >> DEV_ID PC5A03 >> HWTYPE 232 >> SWTYPE 232 >> PORTEX 1 >> FILEID PC5A03.XML >> FSENAB 0 >> FSDLAY 1000 >> WDTMR 10 >> SFILID ETHERNETIP.ZIPH >> SYSCFG 1000 >> SYSOPT 0 >> >> PC5AXX_ECB:PC5A04 >> >> NAME PC5A04 >> TYPE ECB200 >> DESCRP FBM232 TFF PLC >> PERIOD 1 >> PHASE 0 >> DEV_ID PC5A04 >> HWTYPE 232 >> SWTYPE 232 >> PORTEX 1 >> FILEID PC5A04.XML >> FSENAB 0 >> FSDLAY 1000 >> WDTMR 10 >> SFILID ETHERNETIP.ZIPH >> SYSCFG 1000 >> SYSOPT 0 >> >> PC5AXX_ECB:LHMX03 >> >> NAME LHMX03 >> TYPE ECB201 >> DESCRP LHM PLC >> PERIOD 1 >> PHASE 0 >> DEV_ID LHMX03 >> HWTYPE 232 >> SWTYPE 232 >> PARENT PC5A03 >> DVNAME 192.168.1.115 >> DVADDR >> DVOPTS EIP/CLX+SN=0 >> PORTNO 1 >> FILEID LHMX03.XML >> SFILID >> MANFTR >> DVTYPE >> VERNUM >> ERROPT 0xFFFE >> >> PC5AXX_ECB:TFFX04 >> >> NAME TFFX04 >> TYPE ECB201 >> DESCRP TFF PLC >> PERIOD 1 >> PHASE 0 >> DEV_ID TFFX04 >> HWTYPE 232 >> SWTYPE 232 >> PARENT PC5A04 >> DVNAME 192.168.1.105 >> DVADDR >> DVOPTS EIP/CLX+SN=0 >> PORTNO 1 >> FILEID TFFX04.XML >> SFILID >> MANFTR >> DVTYPE >> VERNUM >> ERROPT 0xFFFE >> >> >> >> Joseph M. Riccardi >> >> 386-441-0250 Office >> 386-451-7607 Cell >> >> Joe@xxxxxxxxxxxxx >> >> "To give real service you must add something that cannot be bought or >> measured with money; and that is sincerity and integrity." - Donald A. > Adams >> >> -----Original Message----- >> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] > On >> Behalf Of Joseph M. Riccardi >> Sent: Wednesday, April 25, 2012 8:03 PM >> To: foxboro@xxxxxxxxxxxxx >> Subject: [foxboro] FBM232 FDSI Configurator >> >> FDSI folks, >> I am trying to create a Port, Generic Ethernet xml file for a new FBM232. >> No matter what I enter, when I try to save the configuration, I get an > error >> message "Exception has been thrown by the target of an invocation". Even > if >> I open up an existing one and try to save it with no changes I get the > same >> error message. What am I missing? >> >> The configuration parameters are too simple to mess up, there are just 2; >> Select FBM Type (FBM232) and the IP Address. Duh! >> >> Any suggestions? Nothing in the manual offers any help. >> >> Joseph M. Riccardi >> >> 386-441-0250 Office >> 386-451-7607 Cell >> >> Joe@xxxxxxxxxxxxx >> >> "To give real service you must add something that cannot be bought or >> measured with money; and that is sincerity and integrity." - Donald A. > Adams >> >> >> >> >> >> >> _______________________________________________________________________ >> This mailing list is neither sponsored nor endorsed by Invensys Process >> Systems (formerly The Foxboro Company). Use the info you obtain here at >> your own risks. Read http://www.thecassandraproject.org/disclaimer.html >> >> foxboro mailing list: //www.freelists.org/list/foxboro >> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join >> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave >> >> >> >> >> >> _______________________________________________________________________ >> This mailing list is neither sponsored nor endorsed by Invensys Process >> Systems (formerly The Foxboro Company). Use the info you obtain here at >> your own risks. Read http://www.thecassandraproject.org/disclaimer.html >> >> foxboro mailing list: //www.freelists.org/list/foxboro >> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join >> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave >> > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave