And turned in a CAR? http://ipscsc/sqlcaripa/NewCarFrame.asp?ACCESS_SCREEN=REG Please. It's the only way we can track and correct issues. Remember - "If you CARe, write a CAR." Regards, Alex Johnson Invensys Process Systems Invensys Systems, Inc. 10707 Haddington Houston, TX 77043 713.722.2859 (voice) 713.722.2700 (switchboard) 713.932.0222 (fax) ajohnson@xxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Dumond Sent: Wednesday, January 19, 2005 10:58 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] FBM224 and Atlas Copco Elektronikon We also had a very difficult time with a Modbus FBM224, except our end device was a Prosoft module in a ControlLogix rack. The FBM224 is supposed to support both RS-232 and RS-485, but.......... We had a no luck getting it to work over RS-232, but we were successful = in communicating over RS-485. We troubleshooted this RS-232 problem for quite some time (using = breakout boxes etc), and never could resolve this issue. Our solution: We used RS-485, abandoned RS-232, and called it a day. =20 Mark Dumond Sr App Engineer FeedForward, Inc Marietta, GA -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] = On Behalf Of Balmer, Robert D. Sent: Tuesday, January 18, 2005 4:27 PM To: Foxboro DCS Mail List Subject: [foxboro] FBM224 and Atlas Copco Elektronikon Has anyone out there worked with Modbus communications between the = FBM224 and the Atlas Copco Elektronikon Sequencer? I have a good communications line between the two and still no talking taking place. Anyone have any ideas? Like dip switch settings on the FBM224 TA? =20 My next step may be to have the Atlas Copco folks come in and assure me = they are trying to send information. Thanks =20 Robert Balmer Climax Molybdenum Co. =20 Applications Analyst/Programmer ISA CCST Fort Madison Iowa 319 463 2206 rbalmer@xxxxxxxxxxxxxxx =20 This message (including attachments) is for the designated recipient = only and may contain privileged, proprietary, or otherwise confidential information. If you are not the intended recipient or have received this message in error, please notify the sender immediately and delete the original. Any other use of this e-mail is prohibited.=20 Este mensaje (incluyendo los archivos adjuntos) est=E1 dirigido s=F3lo = al receptor se=F1alado y puede contener informaci=F3n de car=E1cter = privilegiada, privada o confidencial. Si usted no es el receptor se=F1alado o bien ha recibido este mensaje por error, por favor notifique inmediatamente al remitente y elimine el mensaje original. Cualquier otro uso de este = mensaje de correo electr=F3nico est=E1 prohibido. =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at = your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave