You can turn permissions on and off right in the environment files themselves. Must add pref amcmd commands in the environment files to turn on or off capabilities. -------------------------- Sent using BlackBerry ----- Original Message ----- From: Lowell, Timothy [mailto:Timothy.Lowell@xxxxxxxxxxx] Sent: Sunday, April 01, 2012 06:13 PM To: foxboro@xxxxxxxxxxxxx <foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] ACK button inactive in CAD Behavior of the buttons in the CAD is governed by the environment. You set the environment of the CAD in the dmcfg file, which is only read at boot up. If you modify the enviroment file that the dmcfg specifies for that CAD, you can restart the CAD by killing the am.exe in Task Manager, and it will restart with the new environment settings. I don't have all the docs in front of me, but that it basically how it works. Environment files are found in d:\opt\fox\env and d:\opt\customer\env (if nothing is in the customer directory, it reads the fox directory). The dmcfg file is in d:\usr\fox\customer\hi. Tim ________________________________________ From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Richard Peck [lovetomix@xxxxxxxxx] Sent: Sunday, April 01, 2012 4:28 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] ACK button inactive in CAD Hi, I have the opposite... The Clear Page button is accessable and I would like it to not be accessable to the operators. These are configured in a file... somewhere. I think that a reboot is required for the changes to take place... In the file (we use a common one for all WS) you can set the protection ID for each button. So when we are directed to the file -> then we will both have our answer. Richard _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave