Hi list, Brad wrote: > How about flat-screens on WP30s? it generally works, if the monitors have analogue inputs which are = capable of synchronizing to low video frequencies (which are I think 30,6kHz horizontally). Another issue is that they should have good = interpolation algorithms, as there are no LCDs currently available as fas as I know = which have pixel resolutions lower than 1024*768 Pixels, but a WP30 video resolution is even below that. We found it hard to find appropriate devices, the last I have found was = an Eye-Q monitor which was at the end of it's life cycle a year ago. Maybe external Video Frequency doublers are a solution (BlackBox), but I have never tested something like that. Hope that helps. Best regards - Marcel Sieling Systems Technologies Invensys Systems GmbH Emanuel-Leutze-Str. 11 40547 Duesseldorf Germany Tel.: +49-211-5966-302 Fax: +49-163-99-5966302=20 Mobile: +49-163-5966302 Email: mailto:marcel.sieling@xxxxxxxxxxxxxxxx Homepage: http://www.foxboro-deutschland.de > -----Urspr=FCngliche Nachricht----- > Von: foxboro-bounce@xxxxxxxxxxxxx=20 > [mailto:foxboro-bounce@xxxxxxxxxxxxx] Im Auftrag von=20 > tom.vandewater@xxxxxxxxxxxxxx > Gesendet: Mittwoch, 2. Februar 2005 23:26 > An: foxboro@xxxxxxxxxxxxx > Betreff: Re: [foxboro] flat screens on AW51 / WP51 >=20 >=20 > Brad, > As far as the WP-30's go it should be able to work. We=20 > used several different CRT vendors connected to WP-30's. If=20 > memory serves me correctly the WP-30's had 4 BNC connections=20 > that were colored Red, Green, Blue, and Black. The RGB is=20 > pretty obvious but the Black cable carries the Sync signal=20 > and could be either Horizontal or Vertical. Most of the=20 > pigtail cables that go from BNC to HD-15/15 pin D-Sub=20 > connectors have 5 BNC connectors with RGB, White and Yellow. =20 > White is horizontal and yellow is vertical sync. If memory=20 > serves me correctly the black WP-30 RGB connects to the=20 > yellow/vertical cable on CRT's. I'm not even sure if this is=20 > important on the new LCD screens. I've never tried it. > I just had a flashback to 1985 and Videospec CRT's=20 > that only had RGB connectors and the Sync was passed on=20 > concurrently on the Green. It needed to be tee'd off to work=20 > with other CRT's. Suddenly I'm feeling very old. Please, no=20 > responses from young bucks telling me they were "born" in 1985. >=20 > Tom VandeWater >=20 > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx=20 > [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of=20 > brad.s.wilson@xxxxxxxxxxxxxx > Sent: Wednesday, February 02, 2005 4:00 PM > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] flat screens on AW51 / WP51 >=20 >=20 > Thank you for the rapid replies ... a couple more further=20 > questions, if you don't mind ... >=20 > I assume all these LCD monitors have a standard 15-pin=20 > connector, right? (That's what the spec sheets seem to=20 > indicate.) So I would need a pigtail to plug in my RGB cable. >=20 > How about flat-screens on WP30s? >=20 > Brad Wilson > ExxonMobil Chemical Co > Edison Synthetics Plant > 732-321-6115 > 732-321-6177 fax > Brad.S.Wilson@xxxxxxxxxxxxxx >=20 > =20 > =20 > ______________________________________________________________ > _________ > This mailing list is neither sponsored nor endorsed by=20 > Invensys Process Systems (formerly The Foxboro Company). Use=20 > the info you obtain here at your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro=20 > mailing list: //www.freelists.org/list/foxboro > to subscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to=20 > unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 > =20 > =20 > ______________________________________________________________ > _________ > This mailing list is neither sponsored nor endorsed by=20 > Invensys Process Systems (formerly The Foxboro Company). Use=20 > the info you obtain here at your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro=20 > mailing list: //www.freelists.org/list/foxboro > to subscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to=20 > unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 >=20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave