Thx Waleed for your feedback... Rgds Ajit ----- Forwarded by Ajit S Kumar/Technical/SAMREF/SA on 29/08/2007 10:57 AM ----- "Khudhair, Waleed K" <waleed.khudhair@xxxxxxxxxx> Sent by: foxboro-bounce@xxxxxxxxxxxxx 28/08/2007 07:34 AM Please respond to foxboro@xxxxxxxxxxxxx To <foxboro@xxxxxxxxxxxxx> cc Subject Re: [foxboro] AW51E - Second Ethernet Card This may help Configuring the second Ethernet ports For AP/AW 51B series/ Modify the following files: /etc/inet/hosts or /etc/hosts (if possible) to have the IP address and the logical name of the port. /etc/hostname.le0 (the station letter bug ex. 02AP01) /etc/hostname.le1 (the logical name of the port ex. AP51_CCR_EXPERT) Issue the following commands: Ifconfig le1 down=20 Ifconfig le1 unplumb Ifconfig le1 plump Ifconfig le1 (the IP Address given) up=20 For AP/AW 51E series/ Modify the following files: /etc/inet/hosts or /etc/hosts (if possible) to have the IP address and the logical name of the port. /etc/hostname.hme0 (the station letter bug ex. 02AP01) /etc/hostname.hme1 (the logical name of the port ex. AP51_CCR_EXPERT) Issue the following commands: Ifconfig hme1 down=20 Ifconfig hme1 unplumb Ifconfig hme1 plump Ifconfig hme1 (the IP Address given) up -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Ajit.S.Kumar@xxxxxxxxxxxxx Sent: Monday, August 27, 2007 5:36 PM To: foxboro@xxxxxxxxxxxxx Cc: Ajit.S.Kumar@xxxxxxxxxxxxx Subject: [foxboro] AW51E - Second Ethernet Card We have a AW51E installed few years back but the second ethernet Port were=20 never used,But now we have to connect the same to a CISCO 3550 series switch, where all the other PLANT wide Stations WP,AW,AP stations are connected. However I am not able to Ping to the same port or to any other stations. For your Info.we are using DNBT to connect to Nodebus also ping B2AW11hme1 - message as below ICMP Host Unreachable from gateway B2AW11 (151.128.17.201) for icmp from B2AW11 (151.128.17.201) to b2aw11hme1 (192.69.11.163) All the related files are updated as below Example: /etc/hosts secondport 192.69.11.163 Example: /etc/hostname.hme2 secondport OK show-devs=20 /pci@1f,4000/SUNW,hme@2,1 Ethernet FCode selftest Diagnostic done Hme register test -- succeeded Internal loopback test -- succeeded Transceiver check -- Link up ifconfig -a does not show 2 ethernet ports. lo0: flags=3D849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232 inet 127.0.0.1 netmask ff000000=20 hme0: flags=3D863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500 inet 151.128.17.201 netmask ffff0000 broadcast 151.128.255.255 ether 8:0:20:8f:18:31=20 Card used SUN Part#501-4359 ( Fast Ethernet PCI Adapter). Checks done to confirm=20 1.Ethernet Cable replaced 2.Card tested in our DCS Lab working fine, able to ping. Thanks & regards Ajit - SAMREF ,SA =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave