Hi Gang, Bear with me this is my first posting on the list. Hope I am doing this right. Our I/A system has been experiencing a couple of reoccurring problems that I would like some input on. Our system uses a AW51B, (2) WP51Bs, and a couple of go-global stations ( version 1.61). We have hard time getting one of our redundant cp sets, named CP4002, to show up in Foxselect using go-global. There is no problem using Foxselect directly on the AW or one of the WPs. The second problem we have is with 3 CALCA blocks named, LOGIC0521, I53_FO1, and I53_FO2. In the last 3 months we have had to do a Delete and Undelete on these blocks 3 times to get them to function properly. LOGIC0521 controls two valves named HV0521 and HV0522. For no apparent reason this block has received a " dump command" to open HV0522 on 3 occasions. Upon examination of the I53_FO1 and FO2 in Foxselect no cause could be determined. We had to "delete and undelete" these 3 blocks before they would lineup and work. This part of the program has had no changes made since 1998 and has given us no problems. Any thoughts or ideals are appreciated. Ken Lowery Process Controls Specialist Air Liquide America Gulf Coast Pipeline Phone (281) 474-8272 Pager (281) 624-1725 Fax (281) 474-8269 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave