[foxboro] FBM 08 - MPOLL Followup
- From: "BrianLong" <blong@xxxxxxx>
- To: "Foxboro" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 22 Apr 2008 08:47:00 -0500
Here's what I found.....FBM will not download, eeprom or go online. Changed
MPOLL to 0 was 7, FBM would download, eeprom and go online. Changed MPOLL
back to 7, pull pushed FBM, still ok. (I did not document Rev's with each
step)
On a second FBM08 that was in the storeroom. Installed FBM with MPOLL at 7.
FBM downloaded and eepromed but would not go online.
After Download (would not go online) MPOLL 7
Software REV 80.2
EEProm REV 40.1
After EEPROM (would not go online) MP0LL 7
Software REV 61.1
EEProm REV 61.1
Download again (Went online) MPOLL 7
Software REV 80.2
EEProm REV 61.1
If there are any other combinations to try let me know. Thanks for all the
help.
Brian Long
Arkansas Kraft
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] FBM 08 - MPOLL Followup
