[foxboro] Atlas Copco Air Compressors

  • From: "Balmer, Robert D." <rbalmer@xxxxxxxxxxxxxxx>
  • To: "'Foxboro DCS Mail List'" <foxboro@xxxxxxxxxxxxx>
  • Date: Mon, 20 Jan 2003 12:17:24 -0700

Has anyone on the list had any dealing with bringing Atlas Copco air
compressor information into the I/A system?
The  Atlas Copco MKIII Elektronkon units require a Modbus/Modbus Plus
through a Modbus bridge. The companies information goes into some detail,
but not at much length on the "how it is done". Just wondering if any of you
folks have been done this path.
Robert Balmer
Applications Analyst/Programmer
Fort Madison Iowa

This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  • » [foxboro] Atlas Copco Air Compressors