[foxboro] Alarms on a WP51B
- From: "Jim Kahlden" <James.Kahlden@xxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 17 Feb 2005 12:22:13 -0600
Hi List,
We have a WP51B with version 6.3 that has not had alarms going to it
because it was in a remote room. We now want it to alarm like the rest of
our WPs in the system. I configured the Station Block of the two CPs that I
want alarms from, but I am not successful in getting the WP to alarm on the
CAD when an alarm comes in. The alarm is coming in on the other WPs and AW
that these CPs are sending alarms to. What am I missing, or better yet does
anyone have a check list on what to check to see why no alarms on this WP?
Thanks,
Jim Kahlden
jim.kahlden@xxxxxxxx
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Alarms on a WP51B
