Steve, are you sure? I think I remember that repa was only a script which also used getpars, but that could be wrong. -- Sascha Wildner erpicon Software Development GmbH Neusser Str. 724-726 50737 Köln, Germany Voice: +49 221 9746069 Fax: +49 221 9746099 email: swildner@xxxxxxxxxx -----Ursprüngliche Nachricht----- Von: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]Im Auftrag von Steve Rigby Gesendet: Dienstag, 6. November 2001 14:56 An: foxboro@xxxxxxxxxxxxx Betreff: Re: [foxboro] getpars tool Hi all, Back in the old days when I had a Foxboro to play with I used a tool called repa50. This used the CP workfile (no load change on the CP). You could get ALL parameters from ALL blocks. Even from ECB blocks! and then dump it in a text file. It took only 5 minutes heavy AW/AP time to do +/-3000 blocks. Regards Steve Rigby Promasys Upbound International BV Tel: +31 (0)623229455 Fax: +31 (0)104375031 sr@xxxxxxxxxxx www.promasys.nl -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Perez, Claudio Sent: 31 October 2001 11:34 To: 'foxboro@xxxxxxxxxxxxx' Subject: [foxboro] getpars tool Hi list, We are using the command getpars to query the CSA database but asking for some blocks does=B4nt work. The command we use is: getpars -UCP0901 -tCIN -mNM0:%-10.10s -mNM1:%-10-10s=20 but, although the command is correct, we got NA for NM0 and NM1. Any idea? Regads Claudio A. Perez DCS Engineer PROFERTIL S.A. ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave