Thank you Marcelo!!!
That’s also help me out a lot too!!!
From: faaccess-bounce@xxxxxxxxxxxxx [mailto:faaccess-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Vince Mistretta
Sent: Tuesday, June 29, 2021 12:35 PM
To: faaccess@xxxxxxxxxxxxx
Subject: [faaccess] Re: FA rear panel
Thanks much Marcelo. Helps a lot.
Sent from my iPhone
On Jun 29, 2021, at 12:10 PM, Marcelo Fernandes <tchelosoft@xxxxxxxxx> wrote:
Hi dears:
See the description of the Rear Panel items, from left to right, as you are in
front of the keybed:
1. Ground Terminal - optional for a external safe ground connection.
2. Power Switch - has two states, Keyboard ON when the button is lowered,
OFF when button is raised.
3. Power plug IN - to connect the power supply adapter.
4. Cord hook - it is a kind of support, to hook the power cord to prevent
inadvertent disruption of the power.
5. Phones Jack output - it is stereo output plug to connect your
headphones.
6. Main Output Left/Mono - it is a mono output to connect to mixer or
active speakers. If you mixer/speaker has balanced inputs, you can use balanced
cables (TRS) to improve signal quality.
7. Main Output Right - it is a mono output to use together with the Main
output left, to get stereo sound from keyboard. If you mixer/speaker has
balanced inputs, you can use balanced cables (TRS) to improve signal quality.
8. SUB Output - it is a stereo output to connect to another headphones,
mixer or active speakers. There are many setups to assign different sounds
sources to this output.
9. ordinary screw - ignore it.
10. Line Input jack - it is a stereo audio input mini-plug size to connect
microphones or audio devices such a mobile.
11. GUITAR/MIC switch - to left, select inputs to low impedance for
microphones. To right, select inputs to high impedance for guitars.
12. Audio Input jack - it is a mono audio input to connect microphones or
guitars.
13. Audio Input Level - it is a knob to adjust the pre-amp level for
mic/guitar inputs.
14. ordinary 2 screws - ignore them.
15. CTRL 1 - it is foot pedal input for CONTROL 1. Many setups can be done
to work with this input.
16. CTRL 2 - it is foot pedal input for CONTROL 2. Many setups can be done
to work with this input.
17. HOLD - it is the SUSTAIN pedal input.
18. MIDI Input - it is a DIN 5 pin connector for MIDI Input
19. MIDI Output - it is a DIN 5 pin connector for MIDI Output
20. USB Port for Update - it is a rectangular type USB connector, to plug a
USB flash dongle containing firmware and expansions updates.
21. USB Port for Computer - it is a square type USB connector, to plug a
ordinary printer USB cable, to connect to the PC/Laptop/Tablets, to use MIDI
and Audio interfaces.
22. SD Card - it is a SD Card slot with a cover, remove the two screws to
get access to it.
Cheers!
Marcelo.
Mar
On Tue, Jun 29, 2021 at 10:51 AM Vince Mistretta <vmistretta1411@xxxxxxxxx>
wrote:
Front reaching over is fine. Thanks.
Sent from my iPhone
On Jun 29, 2021, at 8:22 AM, Marcelo Fernandes <tchelosoft@xxxxxxxxx> wrote:
Hi Vince:
No signal of Jaffar yet.
Happy with your new acquisition, hope you enjoy it as I do.
Regarding to the Rear Panel description, I can give you a detailed description
right after you confirm if I should describe items from left to right as you
are in front of the keybed or in front of the rear panel ?
Cheers!
On Tue, Jun 29, 2021 at 8:21 AM Vince Mistretta <vmistretta1411@xxxxxxxxx>
wrote:
Ok all I took the plunge and bought a used FA07 with a one year warranty.
Didn’t put the Yano up yet but still will soon.
Reading through the docs Tommy sent me I didn’t find a description of the rear
panel layout. The one for Top Panel is perfect
Could someone share that rear layout. Board will be here by end of week and
want to set it up with all current updates.
Thanks Vince
PS. Any one hear from Jaffar? I may need to write him directly.
Sent from my iPhone