RE: ex2k and firewall
- From: "Hirantha Wijayawardena" <hirantha@xxxxxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Fri, 15 Aug 2003 10:00:57 +0600
It's depending on ur pc router you use. If it is NAT enabled so you have
to bind the mail server public address to the internet interface
(Winroute in mind) and Map to the internal IP address of your mail
server. Make sure your internal DNS is resolves to the internal users as
well.
- Hirantha
-----Original Message-----
From: Hery [mailto:hery@xxxxxxxxxxxxxx]
Sent: Friday, August 15, 2003 8:55 AM
To: [ExchangeList]
Subject: [exchangelist] ex2k and firewall
http://www.MSExchange.org/
hi guys,
i'm plan to setup a new ex2k, and want to install firewall too. i'm
using a pc router (low cost) for internet sharing, and firewall. the
scheme like this :
internet --- pc router -- switch -- LAN
|
ex2k
i'm confused at the ip public for ex2k. from outside, ex2k server can
only known if using public ip, right ? how to set the ip for ex2k, if i
share the connetion from pc router ? or is there better solution for my
scheme ? can you explain to me or is there a good reference link ?
thank's.....
hery
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
hirantha@xxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
