RE: Two issues since upgrading to Exchange 2003
- From: "Chris Wall" <Chris.Wall@xxxxxxxxxxxxxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Fri, 6 May 2005 12:25:56 -0400
I found the same article and that was my issue regarding the PF's...
I am just curious why PFMIGRATE did not transfer that permission from
Exchange 5.5 to 2003?!? I should not have had to manually create that
setting after the move...
This was a pain for me and I have not seen it referenced in any 2003
deployment guides/books.
Thanks,
Chris
_____
From: Raji Arulambalam [mailto:RajiA@xxxxxxxxxxxxxx]
Sent: Thursday, May 05, 2005 9:05 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Two issues since upgrading to Exchange 2003
http://www.MSExchange.org/
check permissions on the public folder.
http://support.microsoft.com/default.aspx?scid=kb;en-us;319753
_____
From: Chris Wall [mailto:Chris.Wall@xxxxxxxxxxxxxxxxxxx]
Sent: Friday, 6 May 2005 3:28 AM
To: [ExchangeList]
Subject: [exchangelist] Two issues since upgrading to Exchange 2003
http://www.MSExchange.org/
Hello all,
Two issues since upgrading to Exchange 2003 and running in Mixed Mode
with Exchange 5.5...
1. I am unable to send any e-mail to Public Folders since they
have been re-homed to the Exchange 2003 server. When sending to the
Public Folders, I get the following bounce back -
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients failed.
EMailAddress@xxxxxxxxxxxxxxxxxxx
Final-Recipient: rfc822;EMailAddress@xxxxxxxxxxxxxxxxxxx
Action: failed
Status: 5.2.1
In looking at MS KB284204, the SID for the Public Folder is most likely
the cause of the error (Status 5.2.1). Where can I check the status of
the SID for Public Folders?
2. Mailbox accounts that are setup to automatically forward a copy of
all e-mails to another recipient produce duplicate e-mails when sending
outside of our network. In other words, on MailboxA, I configure the
account to send a copy of all e-mails to a 'Contact' and also keep a
copy of the e-mail on the Exchange Server. The mail flows fine to both
the MailboxA and to the external Contact address, but the Contact is
receiving two copies of every e-mail...
Thanks for any help,
Chris
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
_____
Email disclaimer: This email and any attachments are confidential. If
you are not the intended recipient, do not copy, disclose or use the
contents in any way. If you receive this message in error, please let
us know by return email and then destroy the message. Environment Bay of
Plenty is not responsible for any changes made to this message and/or
any attachments after sending.
_____
This e-mail has been checked for viruses and no viruses were detected.
_____
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
World of Windows Networking: http://www.windowsnetworking.com
Leading Network Software Directory: http://www.serverfiles.com
No.1 ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSEXchange.org Discussion List as:
Chris.Wall@xxxxxxxxxxxxxxxxxxx
To unsubscribe visit
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Report abuse to listadmin@xxxxxxxxxxxxxx
Other related posts:
