Solved. Something was screwy with the Exchange installation so I made sure that there were no mailboxes on that server and then blew it away before reinstalling it. Problem solved; all I have to do is to work out how to reply to the messages. Malc -----Original Message----- From: Malcolm K Smith Sent: 18 February 2002 13:09 To: [ExchangeList] Subject: [exchangelist] Setting Up Newsfeeds for Exchange 2000 http://www.MSExchange.org/ Has anyone any tips on doing this correctly? I think that I have done it right but, quite obviously, I have not. I have a bridgehead server which seems to pull the newsgroups down (I am only looking at half a dozen as so not to choke the test server) into a folder onto another server's drive. If I look into this folder then I can see the .nws files appearing. The trick is now to get these .nws files into the 'Internet Newsgroups' public folder. This is the bit where I am having problems. Any suggestions as I am going around in circles and can't make the (obvious) connection? Malc Malcolm Smith <http://www.dragondrop.com/> http://www.dragondrop.com ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: malcolm.smith@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')