RE: Remote Connection
- From: "Muqeem Syed" <Syed.Muqeem@xxxxxxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Wed, 20 Feb 2002 20:23:51 +0200
I think you should....... I got messages twice earlier when I tried to
reply to your posting and didnt read it properly.. been like in a mish
mash here... we are working on a VoIP project... I mean we are extending
our VoIP capabilities to include our offices in europe and middle east
to link to our office and the warehouse here.... BTW.. this has nothing
to do with the exchange.. but has anyone here configured cisco 3640 or
2620 or implemented a VoIP through the internet cloud through a VPN or
worked on Nortel BCM ....???
Regards all
-----Original Message-----
From: Amy Dukart [mailto:ADukart@xxxxxxxxxxxxxxxx]
Sent: Wednesday, February 20, 2002 8:17 PM
To: [ExchangeList]
Subject: RE: [exchangelist] RE: Remote Connection
I will try this at lunch. Is there some way to allow certain users to
relay? I do have allow all computers that authenticate to relay in the
relay properties of the SMTP virtual server. Another thing is that I do
not have an SMTP connector, so far there was no need for it. Do I need
one now? Could it possibly be that my ISP doesn't allow relay being
that they are controlling our MX records and such?
Amy Dukart
Information Systems Technician
Steffes Corporation
E-Mail: adukart@xxxxxxxxxxx
-----Original Message-----
From: Muqeem Syed [mailto:Syed.Muqeem@xxxxxxxxxxxx]
Sent: Wednesday, February 20, 2002 11:05 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Remote Connection
http://www.MSExchange.org/
http://www.MSExchange.org/
Relay denied.... looks like the exchange server is treating these
external users as some one trying to relay messages through your
exchange server.... just for a test ... can you enable your exchange to
relay all mails through it... just for a couple of minutes... and then
send the test message again and then disable it again... check the
properties on the dial in clients....let me check if there are any
specific settings that by default enable or disable outlook clients.
Regards
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
adukart@xxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
adukart@xxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
