RE: RAID in Exchange
- From: "Andrea Coppini" <andreacoppini@xxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Sun, 17 Nov 2002 16:00:42 +0100
Of course you can RAID IDE. Check out Promise or Adaptec. They both
have IDE RAIDs which support RAID0, RAID1 and RAID 5 sets.
That wasn't his question though.
-----Original Message-----
From: Mark Arnold [mailto:mark@xxxxxxxx]
Sent: 15 November 2002 12:29 PM
To: [ExchangeList]
Subject: [exchangelist] RE: RAID in Exchange
http://www.MSExchange.org/
You can't really RAID an IDE set.
You need a SCSI subsystem which is where the "every hard disk uses its
own controller" sentence comes in.
The optimal for Exchange is hardware raid with the following
configuration:
2 drives in RAID1 for the operating system.
2 drives in RAID1 for the Exchange logs.
3 or more drives in RAID5 for the exchange stores.
The RAID1 number of drives can be reduced from two individual RAID1 sets
to a pair of drives in RAID1 with two partitions.
If you have to use IDE then you might do it this way:
Controller 0 Primary - Operating System
Controller 0 Slave - Exchange Install and Logs
Controller 1 Primary - Mirrored stores
Controller 1 Slave - Mirrored stores
There are several options, all of which give varying degrees of
resilience/performance mixes.
-----Original Message-----
From: Boed Yun [mailto:boedy@xxxxxxxxxxxxxx]
Sent: 15 November 2002 10:32
To: [ExchangeList]
Subject: [exchangelist] RAID in Exchange
I am a new in IT World and have a stupid question , I've ever post this
message but never get an answer. I want to build Exchange Server. and I
plan to use several HD (I use all IDE both primary and secondary) , they
say I could improve performance by using RAID0 or RAID5 because every
harddisk use its own controller. Can I use that ? or anyone have an idea
?
and sometimes I confuse about harddisk contoller. a friend told me that
it's on the harddisk ( PCB attached to Harddisk) but someone else told
me that it's on the motherboard or separate card.
I don't know which one is correct .
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
andreacoppini@xxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
