[ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

  • From: "Michael B. Smith" <michael@xxxxxxxxxxxxxxxxxxxxxxxx>
  • To: <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 5 Sep 2008 11:45:08 -0400

Yeppers.

 

Regards,

 

Michael B. Smith

MCITP:SA,EMA/MCSE/Exchange MVP

http://TheEssentialExchange.com

 

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of John Parker
Sent: Friday, September 05, 2008 7:20 AM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

I am assuming that after all is said and done, an IP change will not hurt 
anything since everything is done via FQDN’s. yes?

 

Thank you

 

  _____  

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Michael B. Smith
Sent: Thursday, September 04, 2008 8:55 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

If the old server is up, and the new server is up, then Outlook will 
automatically redirect the old server to the new profile. Magic.

 

Once all users are redirected (or the most significant percentage of same), 
then you can shut off the old server.

 

Regards,

 

Michael B. Smith

MCITP:SA,EMA/MCSE/Exchange MVP

http://TheEssentialExchange.com

 

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of John Parker
Sent: Thursday, September 04, 2008 9:52 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

Alright…

 

I am convinced.

Iwill admit to being a bit skiddish.  The server has been very interesting as 
of late and last week, we almost lost it all.  We had some corruption in the 
store and… well it was a very long 46 hours working on it.  I am an admin.  I 
work with exchange every day, but I do not install it every day.  So please 
forgive my naïveté.

 

N00b query…

 

So… once the move is complete…  The use’s outlook 200/2003/2007 will recognize 
the move?  I was under the impression that I would have to touch all of the 
workstations and reset the email server within outlook. 

 

  _____  

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Michael B. Smith
Sent: Thursday, September 04, 2008 8:45 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

<shudder>

 

I’ve done at least 40 2003 -> 2007 upgrades. Several dozens.

 

As Rick says, and as I say – don’t do it that way! You are causing yourself 
pain.

 

Regards,

 

Michael B. Smith

MCITP:SA,EMA/MCSE/Exchange MVP

http://TheEssentialExchange.com

 

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Rick Boza
Sent: Thursday, September 04, 2008 9:33 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

I'm sorry, move mailboxes bail?  Wait, you mean fail?  That's not how a move 
mailbox works.

The move is a copy -> delete function, not a delete ->move.  So in the event a 
move of a mailbox should fail, it reverts back to the original server, and you 
can clean it up and try again.  Users are none the wiser.

So you start moving mailboxes.  Outlook automatically detects the move the next 
time the user starts up, and no need to touch desktops or modify clients.  If a 
move fails, Outlook still sees it on the old server.

There's no halfway functional server at all - even if some moves fail, both 
servers are fully functional.

Also, renaming the server to the old server name is more likely to cause 
problems than solve them - what's the planned process?
backup data
retire server
clear AD of Exchnge, including hacking your way through ADSIEdit
Install new server with old server name
restore data
Hope the identical host name doesn't have any sort of other odd problems, such 
as GUIDs and AD records...?

And so, assuming the process I just outlined (may have missed a step, but at 
the high level, I think it's about right) how is this less risky than a move 
mailbox approach?

Oh yes, and there is no renaming the Exchange server after the server has been 
restored - once Exchange is installed, that server name is what you named it 
originally, it isn't renamed.  There is no rename process.

So, just to be clear, if your consultant is recommending this approach, I 
suggest a new consultant.  Michael has recommended a smooth, pain-free 
solution, I've done the same (and I've done more than a few migrations, I can't 
speak for Michael's migration experience but his knowledge is top shelf) and 
your consultant has (presumably) recommended a path that is unsupported, 
difficult, and likely to fail.  

Sorry to sound blunt, but the approach you appear to be headed down is the 
definition of risky.

On Thu, Sep 4, 2008 at 9:04 PM, John Parker <jp@xxxxxxxxxxxxxx> wrote:

My Question is this.  Why is it risky?

 

We intend to rename the server afterwards to the old server name once the 
mailboxes are on the new box.  Why is this risky since it leaves the old server 
intact.  Whereas, if the move mailboxes bail, I have a halfway functional 
server. And am forced to do a restore.  The old server has been somewhat 
unstable and I do not want to take a chance with losing data.

  _____  

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Rick Boza
Sent: Thursday, September 04, 2008 7:43 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2003 to 2007 Via backup Exec

 

Could not agree more - this sounds like a much more riskly approach as well as 
potential for significant user impact.  Best method nearly all the time is to 
move the mailboxes and avoid pain for both the users AND for you.

On Thu, Sep 4, 2008 at 7:42 PM, Michael B. Smith 
<michael@xxxxxxxxxxxxxxxxxxxxxxxx> wrote:

I would absolutely not do it this way.

 

I would do a move-mailbox from old-server to new-server and then properly 
remove the old server.

 

CAN you do it the other way? Sure. But you'll have to touch every single user 
desktop to update the MAPI profile.

 

Regards,

 

Michael B. Smith

MCITP:SA,EMA/MCSE/Exchange MVP

http://TheEssentialExchange.com

 

From: exchangelist-bounce@xxxxxxxxxxxxx 
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of John Parker
Sent: Thursday, September 04, 2008 7:39 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Exchange 2003 to 2007 Via backup Exec

 

Hey all...

We currently have a 2003 server standard running exchange 2003 Enterprise.
It is on it's last leg and we are replacing it.

We are getting our new server in tomorrow.
I will be installing Server 2008 64bit and Exchange 2007 Std.

Once all of this is installed I intend to restore the individual exchange 2003 
mailboxes to the 2007 machine from backup exec 11d.
Also, to make things go faster, I am also running the backup to disk using a 
backup to disk folder I created.

my consultant sources say that this will work.
 
So... My intention is to shut down the smtp service and then perform a backup. 
Once Backup is complete, then I assume that I install a Backup exec agent on 
the 2007 box and then restore the individual mail boxes.

I am also assuming that I will need to go to the new server afterwards and 
reconnect the mail boxes?
Or can I use the "Recreate user accounts and mailboxes" feature within Backup 
Exec?
 
Am I correct in this ideology?
 
 
Thank you for your help in this.

THE INFORMATION CONTAINED IN THIS EMAIL MESSAGE AND IN ANY ACCOMPANYING 
ATTACHMENT IS A

CONFIDENTIAL AND PRIVILEGED COMMUNICATION.  IT IS INTENDED ONLY FOR THE USE OF 
THE INTENDED

RECIPIENT OR RECIPIENTS.  IF YOU ARE NOT THE INTENDED RECIPIENT OR THE EMPLOYEE 
OR AGENT 

RESPONSIBLE TO DELIVER THIS EMAIL TO THE INTENDED RECIPIENT, YOU ARE HEREBY 
NOTIFIED THAT ANY 

DISCLOSURE, COPYING OR DISTRIBUTION OF THE CONTENTS OF THIS TRANSMISSION IS 
STRICTLY 

PROHIBITED.  IF YOU HAVE RECEIVED THIS EMAIL IN ERROR, PLEASE NOTIFY US 
IMMEDIATELY BY PHONE.

THE INFORMATION CONTAINED IN THIS EMAIL MESSAGE AND IN ANY ACCOMPANYING 
ATTACHMENT IS A

CONFIDENTIAL AND PRIVILEGED COMMUNICATION.  IT IS INTENDED ONLY FOR THE USE OF 
THE INTENDED

RECIPIENT OR RECIPIENTS.  IF YOU ARE NOT THE INTENDED RECIPIENT OR THE EMPLOYEE 
OR AGENT 

RESPONSIBLE TO DELIVER THIS EMAIL TO THE INTENDED RECIPIENT, YOU ARE HEREBY 
NOTIFIED THAT ANY 

DISCLOSURE, COPYING OR DISTRIBUTION OF THE CONTENTS OF THIS TRANSMISSION IS 
STRICTLY 

PROHIBITED.  IF YOU HAVE RECEIVED THIS EMAIL IN ERROR, PLEASE NOTIFY US 
IMMEDIATELY BY PHONE.

Other related posts: