http://www.msexchange.org -------------------------------------------------------Nope -----Original Message----- From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Elmehdi Bendriss Sent: Monday, June 05, 2006 10:57 AM To: exchangelist@xxxxxxxxxxxxx Subject: [ExchangeList] Re: Change private IP on a cluster http://www.msexchange.org -------------------------------------------------------i think it is not needed in case of simple Lan with 1 segment; but if you have alot of servers, with different addressing schema, and you need to MOVE a mailbox, THEN you need WINS On 6/5/06, Jim Harrison <Jim@xxxxxxxxxxxx> wrote: > http://www.msexchange.org > -------------------------------------------------------837391 is getting > changed. > I'm putting in the technical update today. > > It's wrong > Wrong, wrong, wrong. > Wrgonggitty-wrong-wrong Wrong! > > WINS is *NOT* required for Exch functionality, but proper name > resolution support in the network *IS* required. If you've built your > network, name services & clients properly, using a "simple" name gets > you the same response as using FQDN in a "ping" command. > > -----Original Message----- > From: exchangelist-bounce@xxxxxxxxxxxxx > [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Jose Medeiros > Sent: Sunday, June 04, 2006 10:29 PM > To: ActiveDir@xxxxxxxxxxxxxxxxxx; exchangelist@xxxxxxxxxxxxx > Cc: mike.newell@xxxxxxxxxxxx > Subject: [ExchangeList] Change private IP on a cluster > > http://www.msexchange.org > -------------------------------------------------------Hi Mike, > > Looks like you are going to also have dependencies on Wins and with > the > MSDTC: > > Exchange Server 2003 and Exchange 2000 Server require NetBIOS name > resolution for full functionality > http://support.microsoft.com/default.aspx?scid=kb;en-us;837391 > > How to configure Microsoft Distributed Transaction Coordinator on a > Windows Server 2003 cluster > http://support.microsoft.com/default.aspx?scid=kb;en-us;301600 > > Regards, > > Jose :-) > > -------------------------------------------------------------------- > > ----- Original Message ----- > From: Jose Medeiros > To: ActiveDir@xxxxxxxxxxxxxxxxxx ; exchangelist@xxxxxxxxxxxxx > Cc: mike.newell@xxxxxxxxxxxx > Sent: Sunday, June 04, 2006 9:53 PM > Subject: Re: [ActiveDir] Change private IP on a cluster > > > Hi Mike, > > I've only had to change a SQL 2000 Active / Active Cluster IP and it > involves some additional steps for SQL Virtual Names. It's been over 5 > years since I built an Exchange 2000 cluster, but I do not recall if > Exchange has any dependencies (I would probably post this to the > Exchange list and I am cc'ing them as well) > > Take a look at : > Exchange Server 2003 Cluster Configuration Checklist > http://www.microsoft.com/technet/itsolutions/msit/operations/exchclust > er > cklist.mspx?pf=true > > Changing the IP address of network adapters in cluster server > http://support.microsoft.com/kb/230356/EN-US/ > > Or in PDF format at: > http://www.maned.com/support/knowledge_base/Roundhouse/Recommended_Rea > di > ng/Q230356.pdf > > Also just in case you ever have to change it on a SQL: > > How to change the network IP addresses of SQL Server virtual servers > http://support.microsoft.com/kb/244980/en-us > > Hope this helps, > > Sincerely, > Jose Medeiros > MCP+I, MCSE, NT4 MCT > 408-765-0437 Direct > 408-449-6621 Cell > ---------------------------------------------------------------------- > -- > -------------------- > ----- Original Message ----- > From: "Mike Newell" <mike.newell@xxxxxxxxxxxx> > To: <ActiveDir@xxxxxxxxxxxxxxxxxx> > Sent: Sunday, June 04, 2006 12:53 PM > Subject: [ActiveDir] Change private IP on a cluster > > > Doh! Didn't mean to let this go without the OT:. Sorry. > > ________________________________ > > From: ActiveDir-owner@xxxxxxxxxxxxxxxxxx on behalf of Mike Newell > Sent: Sun 6/4/2006 11:40 AM > To: ActiveDir@xxxxxxxxxxxxxxxxxx > Subject: [ActiveDir] Change private IP on a cluster > > > Hey, > I have an Exchange 2003 active/passive cluster on Windows 2003 and I > need to change the private ip on both nodes. I realize that while I'm > changing the IP the nodes will not talk to each other and likely kick > the passive node off or stop the cluster service for a few minutes on > the passive node. > > Is there anything else I will need to do or look out for? I don't > *think* this is a big deal but since it's a production cluster, and > I've never had to do this, I thought I would check before I tried it. > > Thanks again. > > Mike. > > ------------------------------------------------------- > List Archives: //www.freelists.org/archives/exchangelist/ > MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp > MSExchange Articles and Tutorials: > http://www.msexchange.org/articles_tutorials/ > MSExchange Blogs: http://blogs.msexchange.org/ > ------------------------------------------------------- > Visit TechGenix.com for more information about our other sites: > http://www.techgenix.com > ------------------------------------------------------- > To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp > Report abuse to listadmin@xxxxxxxxxxxxxx > > > All mail to and from this domain is GFI-scanned. > > ------------------------------------------------------- > List Archives: //www.freelists.org/archives/exchangelist/ > MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp > MSExchange Articles and Tutorials: > http://www.msexchange.org/articles_tutorials/ > MSExchange Blogs: http://blogs.msexchange.org/ > ------------------------------------------------------- > Visit TechGenix.com for more information about our other sites: > http://www.techgenix.com > ------------------------------------------------------- > To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp > Report abuse to listadmin@xxxxxxxxxxxxxx > > -- _____________________________________________ Bendriss Elmehdi Administrateur Messagerie- Maroc Telecom - DI/DT/PFS Tel: (+212) 37 77 03 28 elmehdi@xxxxxxxxxxx Microsoft Certified Professional -------------------- La théorie, c'est quand on sait tout et que rien ne fonctionne. La pratique, c'est quand tout fonctionne et que personne ne sait pourquoi. Ici, nous avons réuni théorie et pratique : Rien ne fonctionne... et personne ne sait pourquoi ! [Einstein] ------------------------------------------------------- List Archives: //www.freelists.org/archives/exchangelist/ MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp MSExchange Articles and Tutorials: http://www.msexchange.org/articles_tutorials/ MSExchange Blogs: http://blogs.msexchange.org/ ------------------------------------------------------- Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------- To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp Report abuse to listadmin@xxxxxxxxxxxxxx ------------------------------------------------------- List Archives: //www.freelists.org/archives/exchangelist/ MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp MSExchange Articles and Tutorials: http://www.msexchange.org/articles_tutorials/ MSExchange Blogs: http://blogs.msexchange.org/ ------------------------------------------------------- Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------- To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp Report abuse to listadmin@xxxxxxxxxxxxxx