RE: Cannot connect to server issue!!!!

  • From: "KEN MORRIS" <KMORRIS@xxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Thu, 12 Sep 2002 20:04:18 -0400

Title: Cannot connect to server issue!!!!
Yes I can. Full name resolution
-----Original Message-----
From: Michael Steiner [mailto:msteiner@xxxxxxxxxxxxxxxxxxxxx]
Sent: Thursday, September 12, 2002 5:42 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Cannot connect to server issue!!!!

http://www.MSExchange.org/
Can you ping the e2k server both from a netbios FQDN stand point?
-----Original Message-----
From: KEN MORRIS [mailto:KMORRIS@xxxxxxx]
Sent: Thursday, September 12, 2002 2:40 PM
To: [ExchangeList]
Subject: [exchangelist] Cannot connect to server issue!!!!

http://www.MSExchange.org/

Hello,
I am having a VERY strange problem with one PC that is trying to connect to the E2K server. I just replaced one PC with another at the same wall port (same type of PC, same OS and office XP). When you try to connect to the users mailbox on this machine I get a message that tells me that it cannot find the E2K server. This is strange because I can browse to the server via the network as well as ping and tracert to it.

I have logged on as the Admin and still have not been able to get to it.

The Box, and cables have all been replaced, and the cables all tested.

The DNS settings are correct on the box.

I only have connectivity tester and this shows as being good between the wall port and patch panel.

Any suggestions?

Thanks
Ken

This is the only one having issues in the whole place! The first box was replaced due to other reasons the Outlook ran fine on that one!!!

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: msteiner@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: kmorris@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: