Re: file.unpack treats some .zip files as tar.gz
- From: <tpgww@xxxxxxxxxxx>
- To: emelfm2@xxxxxxxxxxxxx
- Date: Mon, 26 Aug 2013 15:21:39 +1000
On Sun, 25 Aug 2013 07:52:59 +0200
Liviu Andronic <landronimirc@xxxxxxxxx> wrote:
Well done for reminding me, Liviu.
Was missing comma in commands array, should be ok in svn now.
Regards
Tom
> I've just checked with latest SVN and the issue is still present
> there. Did you get a chance to look into this unpacking of .zip files
> issue?
>
> Regards,
> Liviu
>
>
> On Sat, Sep 22, 2012 at 9:33 AM, <tpgww@xxxxxxxxxxx> wrote:
> > On Thu, 20 Sep 2012 23:14:46 +0200
> > Liviu Andronic <landronimirc@xxxxxxxxx> wrote:
> >
> >> On Thu, Sep 20, 2012 at 11:57 AM, Charles A Edwards
> >> <eslrahc@xxxxxxxxxxxxx> wrote:
> >> > That would be revision 2570 which is the latest and the same as I am
> >> > running.
> >> >
> >> > I noticed that you had made config changes, adding rar and
> >> > xarchiver.
> >> > You did not by chance modify/patch e2p_unpack.c for your build did you?
> >> >
> >> Not that I know of.
> >>
> >>
> >> > Wondering if you might have a spurious zip entry somewhere.
> >> >
> >> > If you do not mind trying, close emelfm2, rename your config-(lang) and
> >> > replace it with mine which I have attached.
> >> > Launch emelfm2 and try file.unpack again on the same zip.
> >> >
> >> I get the same error when I run 'emelfm2 -o', which uses a default
> >> config, so I guess this should rule out config differences.
> >
> > Super busy here, for the last couple of months and probably for the next
> > couple of weeks.
> >
> > Will look into it then, along with finishing off the plugins changes, for
> > which Liviu reported a problem.
> >
> > Regards
> > Tom
> >
> >
> > --
> > Users can unsubscribe from the list by sending email to
> > emelfm2-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field or by
> > logging into the web interface.
>
>
>
> --
> Do you know how to read?
> http://www.alienetworks.com/srtest.cfm
> http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
> Do you know how to write?
> http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail
>
>
> --
> Users can unsubscribe from the list by sending email to
> emelfm2-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field or by
> logging into the web interface.
--
Users can unsubscribe from the list by sending email to
emelfm2-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field or by
logging into the web interface.
Other related posts:
