[ell-i-developers] Re: Wiki pages: Runtime and Robot Framework Setup
- From: "Atte Peltomaki" <atte.peltomaki@xxxxxx>
- To: ell-i-developers@xxxxxxxxxxxxx
- Date: Mon, 16 Jun 2014 12:21:29 +0300
Yeah, good idea. This should live as a comment here:
https://github.com/Ell-i/Runtime/blob/master/stm32/variants/ellduino/ellduino_gpio.h#L132
On Fri, Jun 13, 2014 at 04:26:22PM +0300, Eero Hakala wrote:
> Hi, I think that we should copy&adapt this from Cosa...
>
> * @section Board
> * @code
> * Arduino Uno
> * ----- -------
> * +-|(o)|-[P]----------| USB |---+
> * | | | [O] | | |
> * | ----- [E] | | |
> * | ------- |
> * | |
> * | []| SCL
> * | []| SDA
> * | []| AREF
> * | []| GND
> * NC |[] []| D13/SCK/LED
> * IOREF |[] []| D12/MISO
> * RESET |[] []| D11/MOSI/PWM5
> * 3V3 |[] []| D10/SS/PWM4
> * 5V |[] []| D9/PWM3
> * GND |[] []| D8
> * GND |[] |
> * Vin |[] []| D7
> * | []| D6/PWM2
> * A0/D14 |[] []| D5/PWM1
> * A1/D15 |[] []| D4
> * A2/D16 |[] []| D3/EXT1/PWM0
> * A3/D17 |[] []| D2/EXT0
> * SDA/A4/D18 |[] ICSP []| D1/TX
> * SCL/A5/D19 |[] o-o-o* []| D0/RX
> * \ o-o-o /
> * +--------------------------+
> * @endcode
> */
>
> On Fri, Jun 13, 2014 at 1:03 PM, Atte Peltomaki <atte.peltomaki@xxxxxx>
> > Action points:
> >
> > * Ellduino pin layout map, basically combine these: (Teemu)
> > http://arduino.cc/en/uploads/Main/ArduinoDue_Front.jpg
> > https://github.com/Ell-i/Hackathon/wiki/Ellduino-expansion-headers
--
Atte Peltomäki
atte.peltomaki@xxxxxx <> http://kameli.org
"Your effort to remain what you are is what limits you"
Other related posts:
