I used to think I was going to cobble together VDO gauges for the '80. Now I'm thinking I'll save my pennies for a Dakota Digital dash.: VFD3-81C-MC http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=200/category_id=-1/home_id=-1/mode=prod/prd200.htm http://www.dakotadigital.com/cartimages/prd_zm_200.jpg http://memimage.cardomain.com/ride_images/3/2140/4041/30349520058_large.jpg http://memimage.cardomain.com/ride_images/3/2140/4041/30349520056_large.jpg I need to see what it takes to become a dealer... the tach adapter I bought worked well and was easy to install. Group buy anyone? On Tue, Oct 20, 2009 at 8:59 PM, Robert Adams <ladams21@xxxxxxxxxxxx> wrote: > >> I think I have the headlight switch bracket and knob you need from the >> Monte parts car. I'll look. >> >> My amp gauge always looks low V, and jumps with the turn signal, also when >> the lights go on. It should a little, but not as much as it does. > > > That's cause of the connection at the pcb to harness. Mine never > did it before. > > >> The light bulbs are always intermittent in these. Cindy's brand new 1978 >> Cutlass Supreme Brougham had that problem from day 1. Taking it in for >> service only made it worse. The tach light was out its entire life. >> >> The center on in the cluster is out on both the Elky and the Monte. >> JC > > > > Mine have always worked and I have only had intermittent... > The printed circuit board on mine is in very good shape 3 spots have > demlaminated at ends but it doesn't affect how it works. The real problem is > the connection between the harness and the PCB and all the other little > contacts at clips etc cause the copper corrodes over time. Even at that it's > the harness to PCB connection that causes all my problems. > > > I have my stock cluster in here looking at it... And test > fitting the gauges with the board on the back. I cut wire and got it started > in the board and bent over so they stay in. Will solder them in tomorrow. I > didn't have many different colors of small wire so I took a roll of purple > wire and all the wires are purple... I'll mark the ends and splice them all > in when I take the cluster back out of the elky. > > > > Robert Adams > > > Rules: Please play nicely with others. > > -List members page (text & pic links): > http://www.myelcamino.net/eclist.htm > -List members page (all pics): > http://www.myelcamino.net/ec_list.htm > > Rules: Please play nicely with others. -List members page (text & pic links): http://www.myelcamino.net/eclist.htm -List members page (all pics): http://www.myelcamino.net/ec_list.htm