Phena,
First, move the lefthand tractor feed as far left as you can. It should
bump up against a cylinder attached to the axel nearest to the front of the
machine. Then, be sure that your left margin on the Juliet is set to
1. To do this, go to the menu you're using (usually menu #1) and enter
15.1-E. Then, set the right margin to 40 by typing 14.40-E. Then, exit
the menu by typing 1.1-E.
Now, go to the Global Embosser Settings in DBT by pressing Ctrl-F11. Set
the Maximum Characters per Line to 40, and the Desired Characters per Line
to 40 for wide paper, or 30 for narrow paper. Set the binding margin to 0,
and exit the menu by pressing OK. You should be back on track. Let me
know how it goes.
Steve
* * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *
