[duxhelp] Re: Embossing - Index Basic D + Removing embossers
- From: "Peter Sullivan" <peter@xxxxxxxxxx>
- To: <duxhelp@xxxxxxxxxxxxx>
- Date: Wed, 22 Mar 2006 06:03:32 -0500
George,
You're unable to remove all the embossers with the DBT 10.6 beta?
This isn't a problem for me.
As you'll recall, this was the case for a time during DBT 10.5 beta testing.
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx]
Sent: Wednesday, March 22, 2006 5:59 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D + Removing embossers
Peter,
While you are looking at this, could you also find out why one cannot remove
the last embosser? That is to say, if I have three embossers set up, and
wish to remove them all, I can get rid of any two, but not the third.
George.
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Sullivan
Sent: 22 March 2006 10:26
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
George,
Sorry. I was reading too quickly.
I'll look into this with David.
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell
Sent: Wednesday, March 22, 2006 4:37 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
Peter,
As the second line of my original message below says, "Index Basic "D" -
Firmware 11.3.2".
George.
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Sullivan
Sent: 21 March 2006 22:00
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
George,
Specifically what Index firmware version are you using?
- Peter
-----Original Message-----
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell
Sent: Tuesday, March 21, 2006 11:21 AM
To: duxhelp@xxxxxxxxxxxxx
Subject: [duxhelp] Re: Embossing - Index Basic D
Peter,
This behaviour is confirmed with Beta 1.
George.
________________________________
From: duxhelp-bounce@xxxxxxxxxxxxx
[mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell
Sent: 21 March 2006 14:42
To: duxhelp@xxxxxxxxxxxxx
Cc: Kevin Sanderson
Subject: [duxhelp] Embossing - Index Basic D
Peter, this applies to 10.5, but we'll check with Beta ASAP.
Index Basic "D" - Firmware 11.3.2
With "Generic Interpoint" setting of 29 or 30 cells and 28 lines per page,
NO binding margin, braille is "back to back"
With "Index Basic D" Version III, 10.25 or newer, the even numbered page is
moved over one cell from the binding edge.
George
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
