Peter, While you are looking at this, could you also find out why one cannot remove the last embosser? That is to say, if I have three embossers set up, and wish to remove them all, I can get rid of any two, but not the third. George. -----Original Message----- From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Sullivan Sent: 22 March 2006 10:26 To: duxhelp@xxxxxxxxxxxxx Subject: [duxhelp] Re: Embossing - Index Basic D George, Sorry. I was reading too quickly. I'll look into this with David. - Peter -----Original Message----- From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: Wednesday, March 22, 2006 4:37 AM To: duxhelp@xxxxxxxxxxxxx Subject: [duxhelp] Re: Embossing - Index Basic D Peter, As the second line of my original message below says, "Index Basic "D" - Firmware 11.3.2". George. -----Original Message----- From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Sullivan Sent: 21 March 2006 22:00 To: duxhelp@xxxxxxxxxxxxx Subject: [duxhelp] Re: Embossing - Index Basic D George, Specifically what Index firmware version are you using? - Peter -----Original Message----- From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: Tuesday, March 21, 2006 11:21 AM To: duxhelp@xxxxxxxxxxxxx Subject: [duxhelp] Re: Embossing - Index Basic D Peter, This behaviour is confirmed with Beta 1. George. ________________________________ From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: 21 March 2006 14:42 To: duxhelp@xxxxxxxxxxxxx Cc: Kevin Sanderson Subject: [duxhelp] Embossing - Index Basic D Peter, this applies to 10.5, but we'll check with Beta ASAP. Index Basic "D" - Firmware 11.3.2 With "Generic Interpoint" setting of 29 or 30 cells and 28 lines per page, NO binding margin, braille is "back to back" With "Index Basic D" Version III, 10.25 or newer, the even numbered page is moved over one cell from the binding edge. George * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxhelp at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *