[duxhelp] Re: Embosser Setup edit box - SOLVED!
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxhelp@xxxxxxxxxxxxx>
- Date: Mon, 7 Jun 2004 14:14:45 +0100
Hi Peter,
I've been through this with Ian on the phone, and see the problem.
Cursor and focus was moving from the Port Selection Box to the
(unspoken) File Text Box, which was obviously wrong.
However, I see that this appears to have been fixed in the most recent
autobuild.
George.
> -----Original Message-----
> From: duxhelp-bounce@xxxxxxxxxxxxx
> [mailto:duxhelp-bounce@xxxxxxxxxxxxx] On Behalf Of Ian Robinson
> Sent: 07 June 2004 10:48
> To: List DBTBeta
> Subject: [duxhelp] Embosser Setup edit box
>
> Hi,
>
> Using Beta 3, Build Date: 24 May 2004.
>
> 1. Embosser Setup, Document or Global, it doesn't matter.
>
> 2. Press the New button.
>
> 3. Enter a setup name.
>
> 4. Choose embosser model.
>
> 5. tab to the available ports combo box; JAWS announces that
> "LPT1" is selected.
>
> 6. tab once, there is an edit box which I suspect should not
> be available.
>
> 7. Shift tab back to the ports combo box.
>
> 8. Press cursor down once, then cursor up once, so that LPT1
> is still selected.
>
> 9. Tab once and the edit box has gone.
>
> If in step 4 above, no embosser is selected, that is to say
> the setting is left as "Generic", the extra edit box does not appear.
>
> Cheers.
>
> Ian
>
>
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
This Message has been scanned for viruses by McAfee Groupshield.
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
- » [duxhelp] Re: Embosser Setup edit box - SOLVED!
