[ddots-l] Re: technical question
- From: Stephen Giannaros <stephen.giannaros@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sat, 12 May 2012 16:46:21 -0400
I tried it with no luck. I downloaded both JAWS 10 and 11 (64 bit).
Both of these were demo copies from the FS website, and when I brought
Sonar up the console was totally different and weird. As soon as I
closed out of 10 or 11 and brought JAWS 13 back up the console changed
back to the track pane and was normal again.
The reason why I downloaded these two versions from the FS site
instead of using my hardcopy of JAWS10 is because that copy is for a
32 bit system and would not install on this system.
Any other thoughts?
On 5/12/12, Jack Conti <jackconti@xxxxxxx> wrote:
> Steve you sure can, using eleven here and
> problems went away. did a clean install of 11 then hsc and lastly ct.
> At 01:48 PM 5/12/2012, you wrote:
>>Yes, that sounds correct. Though, I did not know that until after I
>>got JAWS 13. I wonder since I already have JAWS 13, if I could
>>download JAWS 11 from FS, and use 11 when using CT/Sonar. Before I do
>>any of that just wondering if anyone else has anything else to say on
>>my issue.On 5/12/12, Omar Binno <omarbinno@xxxxxxxxx> wrote:
>> > from my understanding, there hasn't been an official statement saying
>> > that
>> > ct works well with jaws 13. Suppose to work best with jaws 11, if i'm
>> > remembering correctly.
>> > ----- Original Message -----
>> > From: "Stephen Giannaros" <stephen.giannaros@xxxxxxxxx>
>> > To: <ddots-l@xxxxxxxxxxxxx>
>> > Sent: Saturday, May 12, 2012 1:33 PM
>> > Subject: [ddots-l] technical question
>> >
>> >
>> > Hello all,
>> > I am having a little technical problem and want to see if someone can
>> > help me out.
>> > I recently got a new computer and finally got everything up and
>> > running. Last night I recorded some audio tracks, and some of the
>> > editing functions I normally use are not working for me. I will
>> > select a portion of a track, press delete(JAWS does not say “delete”
>> > like it usually would), it will not delete what I selected, but will
>> > delete much more than what I selected. Also, it allows me to copy a
>> > selected track, but will not paste for me.
>> > One adjustment I did make recently to Sonar is I raised the buffer
>> > size for both play back and record from 256 to 512 because when it was
>> > at 256 it was dropping out every two or three seconds whether I was
>> > recording or playing something back. Not sure if this buffer change
>> > has any effect on these editing tasks that I am having problems with.
>> > Also, with my new computer I got JAWS 13, so not sure if that is
>> > complicating things too?
>> > Anyone got any suggestions?
>> >
>> >
>> > Best,
>> >
>> >
>> >
>> > Steve.
>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>> > To leave the list, click on the immediately following link:
>> > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>> > If this link doesn't work then send a message to:
>> > ddots-l-request@xxxxxxxxxxxxx
>> > and in the Subject line type
>> > unsubscribe
>> > For other list commands such as vacation mode,
>> > click on the immediately following link:
>> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> > send a message, to
>> > ddots-l-request@xxxxxxxxxxxxx
>> > and in the Subject line type
>> > faq
>> >
>> > PLEASE READ THIS FOOTER AT LEAST ONCE!
>> > To leave the list, click on the immediately following link:
>> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> > If this link doesn't work then send a message to:
>> > ddots-l-request@xxxxxxxxxxxxx
>> > and in the Subject line type
>> > unsubscribe
>> > For other list commands such as vacation mode,
>> > click on the immediately following link:
>> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> > send a message, to
>> > ddots-l-request@xxxxxxxxxxxxx
>> > and in the Subject line type
>> > faq
>> >
>> >
>>PLEASE READ THIS FOOTER AT LEAST ONCE!
>>To leave the list, click on the immediately following link:
>>ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
>>If this link doesn't work then send a message to:
>>ddots-l-request@xxxxxxxxxxxxx
>>and in the Subject line type
>>unsubscribe
>>For other list commands such as vacation mode,
>>click on the immediately following link:
>>ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>>send a message, to
>>ddots-l-request@xxxxxxxxxxxxx
>>and in the Subject line type
>>faq
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
