Messageno! Regards, Phil Muir P J Muir Productions, Music And Audio Production Telephone: US (615) 713-2021 UK+44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxx URL: www.philmuir.com/ ----- Original Message ----- From: Omar Binno To: ddots-l@xxxxxxxxxxxxx Sent: Wednesday, December 17, 2008 11:35 PM Subject: [ddots-l] Re: sample rate question Caketalking can actually have an effect on sampling rates? ----- Original Message ----- From: Bob Reid Info To: ddots-l@xxxxxxxxxxxxx Sent: Wednesday, December 17, 2008 6:31 PM Subject: [ddots-l] Re: sample rate question I remember trying to record Dimension Pro at 96 KHZ and most of the patches were screwed up in some way. Gordon Kent said at the time that high sampling rates had never truly been tested with Cake Talking but this may have changed recently. Bob. ----- Original Message ----- From: Kevin Gibbs To: ddots-l@xxxxxxxxxxxxx Sent: Wednesday, December 17, 2008 5:59 PM Subject: [ddots-l] Re: sample rate question If you already recorded a project at a given sample rate, you're stuck with that sample rate for that project. I'm pretty sure that the only way you can get your soft synths to record at 96K is to start a blank project with that setting. The reason you're getting the unsupported error is because your original project may be recorded at a different sample rate, say, 48 or 44.1. In a pinch, you could copy your MIDI tracks and paste them into a new project at the desired sample rate if you don't wat to reperform your parts. In addition, there are some cards that only record at certain sample rates. It's possible at the Edirol you have will only go up to 48K. You'll have to check your documentation or visit the web for more information on this. Kevin -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Omar Binno Sent: Wednesday, December 17, 2008 4:39 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] sample rate question Hello, I'm trying to switch the sample rate on my edirol card to 96khz. However, when I open a sonar project, it won't play it and i get an error message that says something like, "the current audio format is not supported by the soundcard," or something like that. I know the rate is switched to 96 in sonar's audio options. The only audio in this project is softsynths. My only guess is that the softsynths don't support 96khz sampling rate. Is that correct? If that's the case: is there a way to record/convert those instruments so that they will play at 96khz? Thanks. OMAR BINNO AIM: LOD1116 SKYPE: obinno1 WEBSITE: www.omarbinno.com