[ddots-l] Re: sample rate question
- From: "Bob Reid Info" <info@xxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Wed, 17 Dec 2008 18:31:34 -0500
MessageI remember trying to record Dimension Pro at 96 KHZ and most of the
patches were screwed up in some way. Gordon Kent said at the time that high
sampling rates had never truly been tested with Cake Talking but this may have
changed recently.
Bob.
----- Original Message -----
From: Kevin Gibbs
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, December 17, 2008 5:59 PM
Subject: [ddots-l] Re: sample rate question
If you already recorded a project at a given sample rate, you're stuck with
that sample rate for that project. I'm pretty sure that the only way you can
get your soft synths to record at 96K is to start a blank project with that
setting. The reason you're getting the unsupported error is because your
original project may be recorded at a different sample rate, say, 48 or 44.1.
In a pinch, you could copy your MIDI tracks and paste them into a new project
at the desired sample rate if you don't wat to reperform your parts. In
addition, there are some cards that only record at certain sample rates. It's
possible at the Edirol you have will only go up to 48K. You'll have to check
your documentation or visit the web for more information on this.
Kevin
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Wednesday, December 17, 2008 4:39 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] sample rate question
Hello,
I'm trying to switch the sample rate on my edirol card to 96khz. However,
when I open a sonar project, it won't play it and i get an error message that
says something like, "the current audio format is not supported by the
soundcard," or something like that. I know the rate is switched to 96 in
sonar's audio options. The only audio in this project is softsynths. My only
guess is that the softsynths don't support 96khz sampling rate. Is that
correct? If that's the case: is there a way to record/convert those instruments
so that they will play at 96khz?
Thanks.
OMAR BINNO
AIM: LOD1116
SKYPE: obinno1
WEBSITE: www.omarbinno.com
Other related posts:
