I just downloaded a manual from the Roland Japan site and that one does reference using the Pads as numeric entry. Interesting why the US manual doesn't have this stated. On 10/8/09, Vince Mistretta <vmistretta1411@xxxxxxxxx> wrote: > Interesting, I've read through all the docs to find it and nothing is > mentioned about a Numeric Entry feature from the Pads on the X. I > think I read the manual about five times not finding it. I know I > found it on the "G" board though. Was it a ROM update? > > On 10/8/09, Mark Dew <jmkeybd1@xxxxxxxxxxx> wrote: >> >> Vince, the fantom x does that. >> >> Mark >> >> At 02:48 PM 10/8/2009 -0400, you wrote: >>>Has anyone tried the Fantom "G" series yet? That has a feature which >>>turns the Pad buttons into numeric keys for direct entry access with >>>just a push of the "Numeric" button. >>> >>>On 10/8/09, Omar Binno <omarbinno@xxxxxxxxx> wrote: >>>> wow. Thanks Mark. I had a fantom x a few years back, and I didn't >> experiment >>>> with it that far. I did notice that the left and right arrows wrapped >>>> around. This is good to know though. >>>> ----- Original Message ----- >>>> From: Mark Dew >>>> To: ddots-l@xxxxxxxxxxxxx >>>> Sent: Thursday, October 08, 2009 1:43 PM >>>> Subject: [ddots-l] Re: questions to fantom synthesizer >>>> >>>> >>>> That is not the case with the fantom x. >>>> I have edited all my favorite voices with out that experience. >>>> The curssor up and down buttons stop at the top and botton. >>>> There are some cases where the left and right will circle around. >>>> It could very well be, I've been using Roland for 23 years and I am >>>> used >>>> to >>>> the madness of it all. >>>> After editing the voices I save them to the user section. >>>> Then I put them in the favorite list. >>>> There are 20 banks containing 16 slots to a bank where you can save a >>>> voice. >>>> When you bring up the favorite list the up and down cursor buttons >> scrolls >>>> through the banks and the f1 through f8 below the screen selects the >>>> voice. >>>> Hold the shift and press f1 through f8, >>>> this selects the 9 through 16 voice of that bank. >>>> Run the up button up and it stops at bank 1. >>>> Run the down button down and it stops at bank 20. >>>> They do not wrap around. >>>> When you enter the edit mode, the f1 and f2 below the screen scrolls >> throu >>>> the different parameter pages. >>>> F1 stops at page 1 and f2 stops at page 18. >>>> The up and down cursor buttons selects the parameter to be edited. >>>> They do not wrap. >>>> I'm not sure, but there could be a setting some where in a menu that >> would >>>> change this. >>>> Of course as you know as a blind user, we all have to be determined >>>> to >>>> find >>>> a way. >>>> >>>> Cheers! >>>> >>>> Mark >>>> >>>> >>>> >>>> >>>> >>>> At 11:43 AM 10/8/2009 -0400, you wrote: >>>> > Most Roland keyboards are largely inaccessible for blind users. >>>> The >>>> >reason for that is that their cursors wrap around in the menus. >>>> They >>>> don't >>>> >stop at the top or the bottom. So you won't know where you left off >>>> if >>>> you >>>> >forget your last position on a menu. They do sound great though. >>>> ----- >>>> >Original Message ----- From: Oliver Zenz To: >>>> ddots-l@xxxxxxxxxxxxx >>>> > Sent: Thursday, October 08, 2009 11:26 AM Subject: [ddots-l] >>>> >questions to fantom synthesizer >>>> >Hi Listers, >>>> > >>>> >some times I have heared, that the roland fantom gear is little >>>> or >>>> more >>>> >accessible by blind users. does anny body of you know something >>>> more? >>>> > >>>> >I heared the Juno G, and this little thing sounds pretty well! so >>>> I >>>> found >>>> >out, that it consists to be of the same soundchip as like the >>>> fantom, >>>> >but it >>>> >just has 61 keys, and i was looking after one with 88 keys. But >>>> all >>>> models >>>> >have different sounds, and i would love to have the same sounds >>>> in >>>> anny >>>> >keyboard of this gear, so under the link below you will find a >> kind of >>>> >editor and librourian that lets you transfer sounds from one to >>>> the >>>> other, >>>> >wich is normally not possible, because roland placed the waves >>>> for >> the >>>> >sounds in each model in different places. now this editor knows >>>> where >>>> the >>>> >waves of each model are placed and makes the apropriat changes to >>>> the >>>> >sounds. so now one can transfer a sound from the fantom-xs to the >> juno >>>> g >>>> >and >>>> >so on. >>>> > >>>> >http://perplextor.wordpress.com/category/juno-g/ >>>> > >>>> >Thanks and enjoy. >>>> > >>>> >ciao, >>>> > >>>> >Oliver >>>> > >>>> >PLEASE READ THIS FOOTER AT LEAST ONCE! >>>> >To leave the list, click on the immediately following link: >>>> >ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>> >If this link doesn't work then send a message to: >>>> >ddots-l-request@xxxxxxxxxxxxx >>>> >and in the Subject line type >>>> >unsubscribe >>>> >For other list commands such as vacation mode, >>>> >click on the immediately following link: >>>> >ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>> >send a message, to >>>> >ddots-l-request@xxxxxxxxxxxxx >>>> >and in the Subject line type >>>> >faq >>>> > >>>> > >>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>> To leave the list, click on the immediately following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>> If this link doesn't work then send a message to: >>>> ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> unsubscribe >>>> For other list commands such as vacation mode, >>>> click on the immediately following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>> send a message, to >>>> ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> faq >>>> >>> >>> >>>-- >>>Vince Mistretta >>>Call me at 561-234-7631 >>>Skype Name: vin5451 (Please email me first) >>>PLEASE READ THIS FOOTER AT LEAST ONCE! >>>To leave the list, click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>If this link doesn't work then send a message to: >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>unsubscribe >>>For other list commands such as vacation mode, >>>click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>send a message, to >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>faq >>> >>> >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, >> click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> send a message, to >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq >> >> > > > -- > Vince Mistretta > Call me at 561-234-7631 > Skype Name: vin5451 (Please email me first) > -- Vince Mistretta Call me at 561-234-7631 Skype Name: vin5451 (Please email me first) PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq