Once reason is installed, you need to go to the prefference, under the
edit
menu in 2.5, and then go to midi and set all the ports to non, and select
in
audio your audio sound card. Also, in general, I usually disable the
splash
screen thing, turn off animations, and set the startup type to empty rack.
Then once all that is set, shut off reason, go in to sonar, create a
project, go to insert, rewire device, and reason should be there if you
installed the rewire component. Once reason opens, (you might have to alt
tab to get to it) it will be on an empty template; you must go to create,
and make a mixer, then go to create and select the sampler/synth you want
to
use, and then use the patch browser (ctrl b) to select an instrument, then
setup the track in sonar to output from channel 3, and bank and patch set
to
non. If you add another instrument in reason, you have to use channel 4
and
so on. Make sure the main mix output track is created when you insert the
device in to sonar, and if you have sighted assistance and can create
mixing
templates, for example machine 1 to outputs 1-2, machine 2 to outputs 3-4
etc, then in sonar you can use separate audio tracks for each
sampler/synth/machine etc. If you need more help/info, shoot away...
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of blue wings
Sent: Friday, August 01, 2008 7:02 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: question about using reason
How to do it in sonar?
----- Original Message -----
From: "D!J!X!" <megamansuperior@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, August 01, 2008 10:27 AM
Subject: [ddots-l] Re: question about using reason
Hello, I use reason2.5 as rewire instrument, with no problem, for basic
things such as loading and using the preset or download samples and
instruments...I also have some wiring configurations that I had a friend
create for me...there are some settings you need to adjust, but it does
work...
HTH, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Dennis Brinkley
Sent: Monday, July 28, 2008 11:13 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] question about using reason
hello all, just out of keriosity, can the software synth reason be used
by
a
blind person at all? I hear that this synthasizer has a lot of power. So
I
am wondering if we can use it in conjunction with cakewalk sonar 7? Maybe
as
a rewired insturment? and also can we do the same with fruity loops? If
anyone uses these 2 programs I would appreciate the help.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
