[ddots-l] Re: problem with new sonar patch

  • From: russell Bourgoin <rusty@xxxxxxxxxxxxxxxx>
  • To: ddots-l@xxxxxxxxxxxxx
  • Date: Mon, 01 Aug 2005 12:05:37 -0400

Hi again,

With further experimentation, I've noticed stuff that's happening now that may help diagnose my problems. I loaded a project into sonar with seven audio tracks. I went to the first unrecorded audio track available and pressed control a to arm it and enable input echo. The feedback began immediately, so I quickly pressed control a a to unarm and disable the input echo. I then just pressed a to arm the track, then r to record into it. No sound came from the motif, so I stopped the recording and listened back to the project. The only thing that got recorded in the blank audio track was the record metronome. So, something is on that should not be, it sounds like. Before I closed and exited my project, I pressed control z to undo that last attempt. Does this give anyone any thoughts as to what could be going on here?

All thoughts are welcome since I don't have anymore. Perhaps I should just go to bed before I hurt myself (yawn).

Rusty


> At 10:36 AM 8/1/2005, Phil Muir spake thusly:-
Yup, you have some plug-ins that you have neglected to install. They could be Sonar ones, free ones
or, perhaps some other ones that you have purchased. Note: when you install Sonar, only some audio
plug-ins will installed by default.


You could try opening the project that is giving you the error message about some plug-ins being
missing. You could then read the "read only list" of plug-ins that are missing and make a note of
it. Do that and let us know which plug-ins are missing. I am sure I will be able to sort this one
out.


Regards, Phil Muir

P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "russell Bourgoin" <rusty@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, August 01, 2005 3:07 PM
Subject: [ddots-l] Re: problem with new sonar patch


> Hello folks, > > I spent a night fiddling. I felt like I was back at ma bell, > running disaster recovery tests all night. Basically, I did the following: > > I un installed caketalk 4.03. I un installed sonar 4.02 with add/remove > programs. I had a sighted friend over at 8 this morning to help me go > through the registry to delete all references of cakewalk and sonar. I > then re installed sonar producer 4.01, the version that shipped on my > cd. I then installed the 4.02 patch. I then installed the 4.03 > patch. Finally, I re installed caketalking. I opened sonar and ran the > test called up with control f12. Nothing yelled at me until I tried > opening a project. It opened but there were missing plug ins that were > referenced in the project, namely reverb on a vocal track, and bass played > with a soft synth. I was told that if I had opened the project in quote > unquote safe mode the effects would be lost. I, with baited breath and > hammer heart, pressed the space bar. I got some sound, very strong reverb > and some sort of feedback loop with bits and pieces of my guitar track > playing. So, somehow before Thursday evening, I've got to get this thing > running correctly again. Any ideas? > > Rusty > > At 07:35 AM 8/1/2005, W. Nick Dotson spake thusly:- > >It's really sounding to me, as a person who makes diagnostics for a > >living, like a function of installation order, what's installed when, and, > >hardware base... > > > >Nick > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

"Be happy. Talk happiness. Happiness calls out responsive gladness in others. There is enough sadness in the world without yours." (Helen Keller)

Check out my web site at:
http://www.thesoundzone.com



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


Other related posts: