[ddots-l] Re: guitar recording
- From: "Mike Christer" <m-christer@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 6 Jan 2007 17:54:44 -0000
Hey Michael!
I've been to the Line 6 website, etc. but can't seem to find where I can
update my XT's flash bios?
Can you advise?
Cheers
Mike
----- Original Message -----
From: "Michael C" <m_dsmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, January 06, 2007 3:40 PM
Subject: [ddots-l] Re: guitar recording
> The flash bios update wil actually update your Pod Xt, or Xt pro with new
> features, and improovements, and as Brian said additional modle pack which
> expands your pod to have more patches, and sounds. The monkey application
> is very accessible to Jaws in that the interface is a standard dialogue
> configuration in which you use your tab to navigate. The glitch is that
> when switching to a different page, you need to actualy go to the tab
> control and use your left and right arrow to navigate through the
> different dialogue pages. Altimatly you would acheeve this by tabbing to
> the control. Hope this helps.
>
> ----- Original Message -----
> From: "Chris Smart" <chris_s@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Friday, January 05, 2007 3:15 PM
> Subject: [ddots-l] Re: guitar recording
>
>
> For the Line6 POD's, you would use the Line6
> Monkey application, available at www.line6.com,
> to check for and install firmware updates, buy
> and install additional Model Packs, etc. I have
> no idea if similar exists for the Vox Tonelab.
> Maybe check the Vox site at www.voxamps.co.uk or
> contact them regarding any firmware updates for the Tonelab products.
>
> Chris
>
> At 04:44 AM 1/5/2007, you wrote:
>
>>Hey Michael!
>>
>>In your post you wrote: "you can upgrade the flash bios."
>>
>>Could you please let me know how you do this, and what it achieves?
>>
>>Thanx
>>
>>Mike
>>----- Original Message -----
>>From: <mailto:m_dsmusic@xxxxxxxxxxxx>Michael C
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Thursday, January 04, 2007 11:41 PM
>>Subject: [ddots-l] Re: guitar recording
>>
>>I there Richard and greg, while the software of the Pod is some what not
>>accessible, you can turn Jaws in say all mode in the Guitar port software,
>>and with the arrow keys scroll through the tones that the Pod Xt has. On
>>a good note, it really well in Sonar, and I am really satisfied with the
>>recording results. Plus the other cool thing about the Pod Xt, or Pro
>>version is that you can upgrade the flash bios. I'm sure the same is with
>>the Tonelab. Its a matter of what sound you are looking for. Nothing out
>>there is going to be perfect.
>>
>>others will argue that the best thing is to actually take a marshall, or
>>other type of amp and mic it up. ----- Original Message -----
>>From: <mailto:psoleil@xxxxxxxxxxxx>PRODUCTIONS BEAUSOLEIL
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Thursday, January 04, 2007 11:46 AM
>>Subject: [ddots-l] Re: guitar recording
>>
>>Hi Greg
>>
>>Does the software for the tonelab is accessible?
>>Richard Beausoleil
>>
>>PRODUCTIONS BEAUSOLEIL
>>Arrangements musicaux
>>Studio multi-pistes
>>Démo vocal
>>
>>Tél : (514) 924-0411
>>Courriel : <mailto:prodsoleil@xxxxxxxxxxx>prodsoleil@xxxxxxxxxxx
>>----- Original Message -----
>>From: <mailto:greg@xxxxxxxxxxxx>Greg Brayton
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Thursday, January 04, 2007 10:37 AM
>>Subject: [ddots-l] Re: guitar recording
>>
>>I have to agree here I just love my tonelab, although I did manage some
>>pretty good sounds with the pod, especially that clean chorusy thing.
>><http://www.gbrayton.com>http://www.gbrayton.com
>>----- Original Message -----
>>From: <mailto:m-christer@xxxxxxxxxxxxx>Mike Christer
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Thursday, January 04, 2007 8:37 AM
>>Subject: [ddots-l] Re: guitar recording
>>
>>Hey guys!
>>
>>I have both the Vox ToneLab, and a whole array of Pods, from the first one
>>to the Pod XT Pro, and I reckon the better one, by a considerable stretch
>>is the ToneLab!
>>
>>It just has a richer character all over!
>>I find that the Pods all suffer from the same fizzy disposition...
>>
>>Mike
>>----- Original Message -----
>>From: <mailto:stuckey2003@xxxxxxx>Joey Stuckey
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Wednesday, January 03, 2007 11:01 PM
>>Subject: [ddots-l] Re: guitar recording
>>
>>That is what I use, I have the Line-6 pod pro guitar and bass and the
>>line-6 duoverb and they work great!
>>
>>They are hard ware not soft ware, but, I like it that way.
>>
>>Joey
>><http://www.joeystuckey.com>www.joeystuckey.com
>>----- Original Message -----
>>From: <mailto:dbmusic@xxxxxxxxxxxx>Gordon Kent
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
>>Sent: Wednesday, January 03, 2007 5:30 PM
>>Subject: [ddots-l] Re: guitar recording
>>
>>Richard:
>>I'm not a guitar player, but a lot of guys have success with one of the
>>line 6 pod modules, which can simulate a wide range of amp and effect
>>setups.
>>Gord
>>----- Original Message -----
>>From: <mailto:psoleil@xxxxxxxxxxxx>PRODUCTIONS BEAUSOLEIL
>>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-list
>>Sent: Wednesday, January 03, 2007 3:11 PM
>>Subject: [ddots-l] guitar recording
>>
>>Hi all
>>I own two electric guitars, a fender strat and a flat five by Godin. I
>>also have a gx-700 guitar fx by boss.
>>For now, I don't have an guitar amp because I don't go to much in live
>>performance.
>>I use it in my home studio most of the time.
>>I plug it in a 24-08 analog mackie.
>>I don't want to necessary want to buy an guitar amp. Is there possible to
>>use a real good preamp to have a good result for a real electric guitar
>>sound?
>>Thanks
>>Richard Beausoleil
>>
>>PRODUCTIONS BEAUSOLEIL
>>Arrangements musicaux
>>Studio multi-pistes
>>Démo vocal
>>
>>Tél : (514) 924-0411
>>Courriel : <mailto:prodsoleil@xxxxxxxxxxx>prodsoleil@xxxxxxxxxxx
>>
>>
>>----------
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.409 / Virus Database: 268.16.4/615 - Release Date: 03/01/2007
>>
>>
>>----------
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.409 / Virus Database: 268.16.4/615 - Release Date: 03/01/2007
>>
>>
>>----------
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.410 / Virus Database: 268.16.5/616 - Release Date: 04/01/2007
>>
>>
>>
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.410 / Virus Database: 268.16.6/617 - Release Date: 1/5/2007
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.410 / Virus Database: 268.16.6/617 - Release Date: 1/5/2007
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.410 / Virus Database: 268.16.5/616 - Release Date: 04/01/2007
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
