[ddots-l] Re: drop out
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 21 Mar 2005 18:51:22 -0000
You can patch affects across a bus and send a selection of tracks to that buss.
That way, you
wouldn't need to patch separate EQ's over each track. That is, assuming that
you want several
tracks to be EQD in the same way. Say for example, you had recorded a bunch of
vocals with the same
singer. You could send all of the vocal tracks to the same buss.
Regards, Phil Muir
P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, March 21, 2005 5:20 PM
Subject: [ddots-l] Re: drop out
> I am getting closer to the point.
> Having said about the reverb, what about the effects that have to go
> separately to the tracks.
> In other words, do I have to leave the aux bus disabled for the effects like
> Eq?
> Thank you Gord,
> Berhane
> ----- Original Message -----
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, March 21, 2005 11:59 AM
> Subject: [ddots-l] Re: drop out
>
>
> > No, you would only enable the reverb send on the tracks that need it.
> > Gord
> > ----- Original Message -----
> > From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Monday, March 21, 2005 11:19 AM
> > Subject: [ddots-l] Re: drop out
> >
> >
> > Hi Gord,
> > Yes, I have used reverbs for three vocal tracks and two instruments.
> > But, if I use the aux bus for the rever, wouldn't affect the other tracks?
> > because, I don't want the reverb for the rest of the tracks.
> > Thanks,
> > Berhane
> > ----- Original Message -----
> > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Monday, March 21, 2005 9:39 AM
> > Subject: [ddots-l] Re: drop out
> >
> >
> >> Well, it would depend on what different effects you are using. Remember,
> >> if
> >> you are using reverbs on a lot of tracks and they are all similar, like
> >> on
> >> a
> >> lot of vocal tracks, you should be using aux buses instead of inserting
> >> the
> >> reverb on each track separately.
> >> Gord
> >> ----- Original Message -----
> >> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> Sent: Monday, March 21, 2005 7:38 AM
> >> Subject: [ddots-l] Re: drop out
> >>
> >>
> >> Hi Gord,
> >> I have done the i/o to 256, and the buffer zone in MOTU is 1024.
> >> Still the problem is there.
> >> To be clear, I have about 20 audio tracks with different effects with
> >> them.
> >> Berhane
> >> ----- Original Message -----
> >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> Sent: Sunday, March 20, 2005 9:26 PM
> >> Subject: [ddots-l] Re: drop out
> >>
> >>
> >>> Berhane:
> >>> Make sure that you have the i/o buffers in the advanced tab of the audio
> >>> options menu set to something like 256 if you have a lot of tradcks in
> >>> you
> >>> project. Go to options (alt O) then audio (o). Control tab to
> >>> advanced,
> >>> then press alt u and type in a value.
> >>> Gord
> >>> ----- Original Message -----
> >>> From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
> >>> To: <ddots-l@xxxxxxxxxxxxx>
> >>> Sent: Friday, March 18, 2005 11:46 AM
> >>> Subject: [ddots-l] drop out
> >>>
> >>>
> >>> Hi everybody,
> >>> While I am transfering midi tracks to audio, message comes (unable to
> >>> save
> >>> entire recording, the Audio disk may be full) and says drop out, and the
> >>> recording process discontinued.
> >>> I didn't understand which Disk might be full, because, I have a lot of
> >>> space
> >>> unused.
> >>> Any Help,
> >>> Berhane
> >>> ** To leave the list, click on the immediately-following link:-
> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >>> ** If this link doesn't work then send a message to:
> >>> ** ddots-l-request@xxxxxxxxxxxxx
> >>> ** and in the Subject line type
> >>> ** unsubscribe
> >>> ** For other list commands such as vacation mode, click on the
> >>> ** immediately-following link:-
> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >>> ** or send a message, to
> >>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>> ** To leave the list, click on the immediately-following link:-
> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >>> ** If this link doesn't work then send a message to:
> >>> ** ddots-l-request@xxxxxxxxxxxxx
> >>> ** and in the Subject line type
> >>> ** unsubscribe
> >>> ** For other list commands such as vacation mode, click on the
> >>> ** immediately-following link:-
> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >>> ** or send a message, to
> >>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>
> >>>
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >>
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
