I just realized that, thanks a lot Berhene. However, suppose I just want to control the reverb level from the inserts on the track, will I have to go into the individual reverb effect itself, and if so, I can't seem to have caketalking read the edit fields and what they mean. ----- Original Message ----- From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Tuesday, November 07, 2006 1:31 AM Subject: [ddots-l] Re: changing the level of effects non destructive in sonar 4.03 > So, the send level of the Auxs has nothing to do with the effects you insert > in the individual tracks. It only works if you insert the effects in the Aux > bus. > ----- Original Message ----- > From: <fioresq1@xxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Tuesday, November 07, 2006 12:30 AM > Subject: [ddots-l] Re: changing the level of effects non destructive in > sonar 4.03 > > > > in the individual track, if I understand what you mean. > > ----- Original Message ----- > > From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx> > > To: <ddots-l@xxxxxxxxxxxxx> > > Sent: Tuesday, November 07, 2006 12:24 AM > > Subject: [ddots-l] Re: changing the level of effects non destructive in > > sonar 4.03 > > > > > >> Did you use the reverb in Aux or in the individual track? > >> > >> ----- Original Message ----- > >> From: <fioresq1@xxxxxxxxxxx> > >> To: <ddots-l@xxxxxxxxxxxxx> > >> Cc: <midimag@xxxxxxxxxxx> > >> Sent: Monday, November 06, 2006 11:47 PM > >> Subject: [ddots-l] changing the level of effects non destructive in sonar > >> 4.03 > >> > >> > >> > > >> > Hello: I have chosen one of sonar's normal files and done a > >> > short > >> > audio track with sonar reverb effects. I am on track 17 which is > >> > audio. > >> > I > >> > am inserting effects non destructively. I want to reduce the level of > > the > >> > reverb and though I could do it in the sends. In all the sends I have > >> > enabled the bus aux send and changed the levels in the bus aux sends to > >> > minus and plus numbers, I have used pre and post fader positions. > >> > Unfortunately, the level of the effects will not change. In fact, the > >> > sends do nothing. I know I'm doing something wrong but can't figure > >> > out > >> > what. any help would be appreciated. ----- Original Message ----- > >> > From: "David Eagle" <onlineeagle@xxxxxxxxxxxxxx> > >> > To: <ddots-l@xxxxxxxxxxxxx> > >> > Sent: Monday, November 06, 2006 8:57 AM > >> > Subject: [ddots-l] Re: Classical Recording, what to do what to do... > >> > > >> > > >> >> HI, I've listened to the files and would say a definite no to any > >> >> noise reduction or gating. You might want to try something like > >> >> smooth compression in sound forge, as the dynamics are very dramatic. > >> >> This is fine when there is no background noise, but the conductor > >> >> wasn't very audible and I had to turn him up. The timpani cuts through > >> >> the mix a bit in terms of the lower frequencies. Its not too > >> >> distracting however, but you may wish to consider a little bit of > >> >> frequency modification, with with EQ. Other than that it sounded > >> >> great. > >> >> > >> >> > >> >> The Young'uns Podcast arrives on Friday morning, featuring forty folk > >> >> filled minutes. > >> >> www.theyounguns.co.uk > >> >> > >> >> > >> >> > >> >> > >> >> On 06/11/06, Chris Smart <chris_s@xxxxxxxxxxxx> wrote: > >> >> > Hi folks! I'm hoping some of you have the bandwidth and time to > >> >> > lend me your ears and expertise for a few moments. > >> >> > > >> >> > My stealth cheapo recording setup captured a great amateur > >> >> > orchestra this afternoon. > >> >> > Core Sound omnis + battery box, M-audio Microtrack 24/96, at > >> >> > 24bit/48KHZ uncompressed, transfer to PC via USB, Sound Forge 6. > >> >> > > >> >> > I'm used to recording amplified music, mostly of the 100DB and up > >> >> > variety, so I'm not sure if a completely acoustic symphony > >> >> > recording needs any tweezing or processing at all. > >> >> > > >> >> > I extracted some test samples. These are straight 24-bit 48KHZ > >> >> > .wav files, and the names are fairly explanatory. The "Focus > >> >> > Sample" goes from a loud bass drum hit to black, or what would be > >> >> > black if I didn't have lots of background noise. The Intro sample > >> >> > is just the conductor introducing the performance, > >> >> > unamplified. The others are pretty easy to figure out. > >> >> > > >> >> > If you want to give them a listen, here's a download link: > >> >> > > >> >> > http://download.yousendit.com/6086FED16692B3C3 > >> >> > > >> >> > The zip file is about 36MB. > >> >> > > >> >> > I have a ton of software on the computer, Sound Forge 6 and > >> >> > associated plugins, and Sonar 5.2 Producer and it's complement of > >> >> > tools. So, if these were your recordings, and you wanted to > >> >> > delicately polish them up, what would you do, if anything? Maybe a > >> >> > little compression or EQ? Would you even attempt any noise > >> >> > reduction? > >> >> > > >> >> > I'm obviously going to keep my original 24/48 files, probably > >> >> > burned to an audio-only DVD-r for safe keeping, but I'd like to > >> >> > experiment and learn as well. > >> >> > > >> >> > Thank you in advance for any suggestions! > >> >> > > >> >> > Chris > >> >> > > >> >> > > >> >> > -- > >> >> > No virus found in this outgoing message. > >> >> > Checked by AVG Free Edition. > >> >> > Version: 7.1.409 / Virus Database: 268.13.27/517 - Release Date: > >> > 11/3/2006 > >> >> > > >> >> > > >> >> > ** To leave the list, click on the immediately-following link:- > >> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >> > ** If this link doesn't work then send a message to: > >> >> > ** ddots-l-request@xxxxxxxxxxxxx > >> >> > ** and in the Subject line type > >> >> > ** unsubscribe > >> >> > ** For other list commands such as vacation mode, click on the > >> >> > ** immediately-following link:- > >> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> >> > ** or send a message, to > >> >> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >> >> > > >> >> > > >> >> ** To leave the list, click on the immediately-following link:- > >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> >> ** If this link doesn't work then send a message to: > >> >> ** ddots-l-request@xxxxxxxxxxxxx > >> >> ** and in the Subject line type > >> >> ** unsubscribe > >> >> ** For other list commands such as vacation mode, click on the > >> >> ** immediately-following link:- > >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> >> ** or send a message, to > >> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >> >> > >> > > >> > ** To leave the list, click on the immediately-following link:- > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> > ** If this link doesn't work then send a message to: > >> > ** ddots-l-request@xxxxxxxxxxxxx > >> > ** and in the Subject line type > >> > ** unsubscribe > >> > ** For other list commands such as vacation mode, click on the > >> > ** immediately-following link:- > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> > ** or send a message, to > >> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >> > > >> ** To leave the list, click on the immediately-following link:- > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >> ** If this link doesn't work then send a message to: > >> ** ddots-l-request@xxxxxxxxxxxxx > >> ** and in the Subject line type > >> ** unsubscribe > >> ** For other list commands such as vacation mode, click on the > >> ** immediately-following link:- > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >> ** or send a message, to > >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >> > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** ddots-l-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq