[ddots-l] Re: Sonar Loop View
- From: "John Sanfilippo" <vze33fba@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 19 Mar 2006 06:53:00 -0500
Hi Jay,
Welcome.
I don't have much experience with this, but I would think you should
still hear something.
You're using the same external audio card at home that you use in the
studio?
I would say, make sure the card is properly connected and installed. try
midi devices under global options, and make sure some midi out devices
are chosen.
Best regards,
John s
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Jay Pilkington
Sent: Saturday, March 18, 2006 22:19
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Sonar Loop View
This is my first posting to this list, and taking a risk that what I'm
about
to ask isn't so mind-numbingly stupid as to defy the most patient of you
folks. Here we go.
Is it necessary for me to have a MIDI device connected in order to hear
audio loops while in the Loop View?
I'm using an M-Audio external USB card, and its been working just great.
I
brought it home with my laptop from the studio, and though I can still
import a loop to an audio track, and even hear it in playback, I can't
hear
any loops in Loop View. The only difference in what I'm doing here at
home
as opposed to the studio is that I don't have any MIDI keyboard
connected
here.
If this is indeed the case, is there a work-around? I just wanted to do
some loop construction over the weekend.
Thanks in advance for your help.
In His abiding presence,
Jay Pilkington, Director of Worship and Music
Alive In Christ, Phone: 573-499-0443 X203
"The LORD is near to the brokenhearted, And saves those who are crushed
in
spirit." (Ps 34:18 NAS)
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
