[ddots-l] Re: Recording issues
- From: Stacy Blackwell <stacy.blackwell@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 13 Oct 2009 16:06:04 -0500
If nobody has figured out your problem, in reading your post, it sounds as if
your second microphone that is plugged into the second XLR slot needs to be set
to Right Analog 1, not left Analog 3. Left Analog 3 is for channel 3 on the FW
1884. I hope this helps.
From: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Recording issues
Date: Mon, 12 Oct 2009 21:21:46 +0100
No.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]On
Behalf Of Jim Jackson
Sent: 12 October 2009 20:55
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Recording issues
Could this be something with a setting on the Tascam?
----- Original Message -----
From: Mike Christer
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, October 12, 2009 1:14 PM
Subject: [ddots-l] Re: Recording issues
Hey Jim!
You'll only be able to monitor one track's input level/peak meter reading at a
time.
So, you'll have to arm each track separately and take an input level reading,
then switch to the other...
Of course, you'll be able to record the 2 trax simultaneously!
I think this could be the prob?
Mike
----- Original Message -----
From: Jim Jackson
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, October 12, 2009 5:31 PM
Subject: [ddots-l] Recording issues
Hello all, I'm attempting to record vocals, I have things set up as follows,
vocal mic 1, audio track 1 and input set to left-acio fw-1884analog1 the cable
from the mic is plugged in to the far left slr slot on the back of the tascam
as I face the front of the unit. No prob with this one, I can both hear the
audio and can monitor the peak levels.
The second audio track is vocal mic 2, Input set to left acio fw-1884analog3,
the cable from the mic is plugged in to the next slr slot. I can hear the
audio from the mic but the peak meters are not changing, I go in to record and
get nothing. BTW, on both tracks the output is set to master.
What am I doing?
Jimmy
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.421 / Virus Database: 270.14.12/2431 - Release Date: 10/12/09
13:01:00
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/171222984/direct/01/
Other related posts:
