OK, the drivers didn't install correctly. The loader's in the right place, but you should also have entries under the other group. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jay Pellis Sent: 07 February 2011 14:14 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: M-audio midi sport 4x4 midi interface in windows7? Nope, forgot to mention that it didn't. Under universal serial bus controllers, the midisport loader shows up and says it is working properly. But again, nothing under sound and audio, which is where I thought it would be listed. All that is there is the built in motherboard sound as well as my soundblaster and m-audio soundcards. Thanks Jay -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess Sent: Monday, February 07, 2011 2:01 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: M-audio midi sport 4x4 midi interface in windows7? Does the unit show up in the Windows 7 Device Manager under Sound and Audio Devices? Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jay Pellis Sent: 06 February 2011 05:53 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] M-audio midi sport 4x4 midi interface in windows7? Hi all Still working on weekends getting this desktop studio set up and saw that my m-audio midisport 4x4 doesn't seem to be recognized by any program, be it sonar, sound forge 10 etc. I downloaded and installed drivers that said they supported windows7 64 bit and reinstalled them multiple times, plugged and unplugged the USB cable, restarted sonar etc and still no luck. Has anyone had success with these interfaces? If this can't be resolved, I may pick up the cakewalk UM-3G 3x3 since I'm sure that will work 100 percent. I am hoping my m-audio delta2496 card won't have any issues either since I would like to use as much of my set up from my xp machine as possible and not have to purchase new equipment. I haven't tested it so far for recording but programs recognize it and playback seems fine so we will see. Thanks for any help Jay PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq