[ddots-l] Re: Issue with my mac book and Tascam FW1884.
- From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 22 Nov 2008 12:22:08 -0600
Hi. It's not only in Sonar... This is happening even when you play back an
mp3 file in winamp or windows media player etc.
Cameron.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Saturday, November 22, 2008 8:49 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.
Hmm, depends. I personally have generally found using WDM drivers,
especially on core duo systems better with the FW1884. If your going to use
WDM then, set the slider in the FW1884 control panel to 16%. Then, put the
slider in Sonar as low as possible and profile the card.
Regards, Phil Muir
P J Muir Productions,
Music And Audio Production
Telephone: US (615) 713-2021
UK+44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxx
URL:
www.philmuir.com/
----- Original Message -----
From: "Mike C" <m_dsmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, November 22, 2008 2:02 PM
Subject: [ddots-l] Re: Issue with my mac book and Tascam FW1884.
> hey try using asio drivers, and also in the control panel of the fw1884
> trying increase your buffer there too.
>
> ----- Original Message -----
> From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Friday, November 21, 2008 4:30 PM
> Subject: [ddots-l] Issue with my mac book and Tascam FW1884.
>
>
>> Hi all. Well, I thought I had revived my desktop but after two days of
>> installing and configuring everything, my system drive is shot.
>>
>> So, I'm left with my mac book now. I am having an issue with the FW1884
>> with it though.
>>
>> I have the latest firmware installed, as well as the latest drivers, and
>> latest Sonar plug in. Here are the mac book specs. 2.4gHz Intel core 2
>> duo
>> processor, 2 gigs of ram, 160gig hd. I have a partition setup so half is
>> OSX Lepard and the other half is Windows xp pro service pac 3. I've
>> installed Sonar producer 7.2 and the latest version of jSonar for Sonar
>> seven.
>>
>> Anyways, whether audio is currently playing back or not, I am getting
>> little
>> noises through my monitors every twenty seconds or so. And then the
>> audio
>> totally stops. About six or seven seconds later, the audio continues
>> where
>> it left off. While the audio is playing, there are no cracks, pops,
>> skips,
>> etc. When the drop out happens, it's immediate and the same goes for
>> when
>> the audio playback resumes. This happens even when only listening to an
>> mp3
>> or video using winamp for example. It's not like I'm pushing the machine
>> or
>> the tascam hard or anything. I've disabled the firewire network adaptor
>> and
>> that has made no difference. There are also no other firewire devices
>> hooked up. Just the FW1884.
>>
>> The internal sound card on the mac book has no issues.
>>
>> I am hoping that putting a new system drive in my desktop will allow me
>> to
>> go back to that for my music work but it's not something I can take care
>> of
>> soon so the mac book is my only midi/audio option at the moment.
>>
>> Any tips on what I could do to solve this?
>>
>> Thanks,
>>
>> Cameron.
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the immediately
> following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.9.9/1805 - Release Date: 11/22/2008
10:34 AM
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
