[ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 27 Apr 2007 17:40:40 -0400
Who should I call?
Aren't they monitoring this list?
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 5:35 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
I really think you need to talk to Dancing Dots directly.
They will be able to walk through it all with you and check
things out as you go.
George.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
Montebello
Sent: 27 April 2007 22:32
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Hey George!
Reading this post of mine again, I think it's still not
clear!!!
I have the CT 5.3 scripts installed in Jaws 8 but I want to
free it for Sonar 6 scripts Why is it that I was able to
install the CT 5.3 scripts to Jaws 6.2 before and since I
installed Jaws 8 I can't do it anymore with the same
installer?
I'm really puzzled!
Jean
Please visit my site at http://www.studiomontebello.com You
can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 4:48 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Hey George!
Sorry about the confusion but all I want to do is to be able
to install the CT 5.3 scripts on Jaws 6.2 as they were
before I unstalled them.
I have Sonar 6 installed with the appropriate scripts but am
not willing to work with it for now. I'm only experimenting
with sonar 6 for the time being!
And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the
scripts, both CT and J Sonar.
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 2:42 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Hi Jean,
(Your message only got through because I manually approved
it - and then changed the format to plain text to remove the
graphics)
I'm getting a bit confused here.
What version of CakeTalking for Sonar do you actually want
to run?
If you already have the latest Sonar 6.#, I would suggest
you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#.
It is much easier to support the newest versions.
George.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
Montebello
Sent: 27 April 2007 17:22
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Hey George!
OK for the graphics, but this one seems to have gotten thru?
I need to install CT 3 5.2 or 5.3 on Jaws 6.2 because I'm
already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6
and J Sonar 6.
At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to
free it up for Sonar 6.2.
When I installed Jaws 8 on my machine, I uninstalled CT 5.3
from Jaws 6.2 to put it on Jaws 8 and since then, I am no
longer able to reinstall it to Jaws 6.2!
It worked really well with Jaws 6.2 and I guess I should
have let it alone.<grin>!!!
So, that's the deal!
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, April 27, 2007 11:18 AM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
Hi Jean,
I suspect the reason you didn't get an answer before was
that your message was rejected due to the list message size
limitation of 20k. Your graphics alone come to 27k.
I know you should technically be able to have JAWS 6.2
running, but 7.0 or 7.1 is recommended by Dancing Dots. (See
http://www.dancingdots.com/support/supportcaketalking5.htm
for details)
Can you also check the version of CakeTalking? You should
have 5.2.
George.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
Montebello
Sent: 27 April 2007 15:47
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2
Hello Everyone!
I have asked this question before but have never got an
answer!
I need to install CT 5.3 on Jaws 6.2 but the install doesn't
show it in the list box.
Only Jaws 8, 7.1 and 7.0 appear.
I have repaired Jaws 6.2 but it still doesnt show.
I really need to do this and would appreciate support on
this matter.
Best regards,
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.463 / Virus Database: 269.6.1/777 - Release
Date: 26/04/2007 15:23
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.463 / Virus Database: 269.6.1/777 - Release
Date: 26/04/2007 15:23
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
