[ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 1 May 2007 16:20:13 -0400
But Gordon,
I'm not running Sonar 6 with Jaws 6.2.
I'm running it with Jaws 7.0 with the CT scripts and Jaws 7.1 with J Sonar.
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, May 01, 2007 3:28 PM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
> Jean:
> The problem was with Jaws 6.2 and any version of Sonar. I haven't tried
> running Sonar without scripts at all. I'll have to see.
> Gord
> ----- Original Message -----
> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, April 30, 2007 7:01 PM
> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>
>
> Hey Gordon!
> I'm a bit confused with your answer but I realize that it's my own fault as
> there was a typo in my post.
> It should have read "Jaws 6.2" instead of Sonar 6.2!!!
> But your answer is nevertheless very interesting indeed.
> I thought I had resolved the sluggishness issue in Sonar 6.2 by removing the
> X-Ray option but to my great surprise, the very next morning the problem
> came back almost as bad.
> It's hard to believe that the problem is with Sonar because when I run it
> without Jaws everything is perfect.
> Even running with Jaws without CT or J Sonar is perfect.
> Is this memory leakeage affecting only those of us using scripts?
> To me, there seem to be nothing wrong with Sonar 6.2 if you run it without
> scripts, CT or J Sonar!
> If my diagnostic is wright, do you think that Twelve tones and maybe Dancing
> Dots will give us an upgrade free?<grin>.
> Thanks for taking this up for me.
> Jean
>
> Please visit my site at http://www.studiomontebello.com
> You can also visit my girlfriend's art gallery at
> http://www.marie-helenemasse.com
>
> ----- Original Message -----
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, April 30, 2007 10:34 AM
> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>
>
>> Jean:
>> Well, of course you should be entitled to use what you want, but I will
>> tell
>> you this, and this is right from the horse's mouth (fs). There were
>> memory
>> leak issues with jaws 6.2 that did degrade performance with Sonar over
>> time.
>> These were resolved in version 7. I don't want you to think I'm just
>> telling you this to pass the buck, but it is a reality. But I will see if
>> I
>> can get to the bottom of this for you.
>> Gord
>> ----- Original Message -----
>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Monday, April 30, 2007 7:44 AM
>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>
>>
>> Hey Gord!
>> Can you check on this?
>> I'd still like to use Jaws 6.2 with CT 5.
>> Jean
>>
>> Please visit my site at http://www.studiomontebello.com
>> You can also visit my girlfriend's art gallery at
>> http://www.marie-helenemasse.com
>>
>> ----- Original Message -----
>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Sunday, April 29, 2007 11:18 PM
>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>
>>
>>> Well, I have a theory about this. I did have jaws 6.2 on my system as
>>> well
>>> as 7 7.1 and 8. I am wondering if the installer can only see three
>>> versions
>>> of jaws at once.
>>> Gord
>>> ----- Original Message -----
>>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Sunday, April 29, 2007 6:52 PM
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>> Hey Gord!
>>> That's pretty much what I'm doing now.
>>> It's not really a big deal as I am using sonar 6.2 for J Sonar 5.
>>> But, I'm still puzzled as to why I can't reinstall CT 5 in Jaws 6.2
>>> because
>>> that's where it was before I unstalled it?
>>> Surely at some point the installer could see Jaws 6.2 and it doesn't no
>>> more.
>>> Go figure?
>>>
>>> Jean
>>>
>>> Please visit my site at http://www.studiomontebello.com
>>> You can also visit my girlfriend's art gallery at
>>> http://www.marie-helenemasse.com
>>>
>>> ----- Original Message -----
>>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Sunday, April 29, 2007 6:36 PM
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>>> Jean:
>>>> If you have three versions of jaws on your system, why not use one for
>>>> ct6,
>>>> one for jSonar, and the other for ct5? You could run ct5 under jaws 7
>>>> for
>>>> example.
>>>> Gord
>>>> ----- Original Message -----
>>>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Friday, April 27, 2007 4:48 PM
>>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>>
>>>>
>>>> Hey George!
>>>> Sorry about the confusion but all I want to do is to be able to install
>>>> the
>>>> CT 5.3 scripts on Jaws 6.2 as they were before I unstalled them.
>>>> I have Sonar 6 installed with the appropriate scripts but am not willing
>>>> to
>>>> work with it for now. I'm only experimenting with sonar 6 for the time
>>>> being!
>>>> And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the scripts,
>>>> both
>>>> CT
>>>> and J Sonar.
>>>> Jean
>>>>
>>>> Please visit my site at http://www.studiomontebello.com
>>>> You can also visit my girlfriend's art gallery at
>>>> http://www.marie-helenemasse.com
>>>>
>>>> ----- Original Message -----
>>>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Friday, April 27, 2007 2:42 PM
>>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>>
>>>>
>>>> Hi Jean,
>>>>
>>>> (Your message only got through because I manually approved
>>>> it - and then changed the format to plain text to remove the
>>>> graphics)
>>>>
>>>> I'm getting a bit confused here.
>>>>
>>>> What version of CakeTalking for Sonar do you actually want
>>>> to run?
>>>>
>>>> If you already have the latest Sonar 6.#, I would suggest
>>>> you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#.
>>>>
>>>> It is much easier to support the newest versions.
>>>>
>>>> George.
>>>>
>>>> -----Original Message-----
>>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
>>>> Montebello
>>>> Sent: 27 April 2007 17:22
>>>> To: ddots-l@xxxxxxxxxxxxx
>>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>>
>>>> Hey George!
>>>> OK for the graphics, but this one seems to have gotten thru?
>>>> I need to install CT 3 5.2 or 5.3 on Jaws 6.2 because I'm
>>>> already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6
>>>> and J Sonar 6.
>>>> At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to
>>>> free it up for Sonar 6.2.
>>>> When I installed Jaws 8 on my machine, I uninstalled CT 5.3
>>>> from Jaws 6.2 to put it on Jaws 8 and since then, I am no
>>>> longer able to reinstall it to Jaws 6.2!
>>>> It worked really well with Jaws 6.2 and I guess I should
>>>> have let it alone.<grin>!!!
>>>> So, that's the deal!
>>>> Jean
>>>>
>>>> Please visit my site at http://www.studiomontebello.com
>>>> You can also visit my girlfriend's art gallery at
>>>> http://www.marie-helenemasse.com
>>>>
>>>> ----- Original Message -----
>>>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Friday, April 27, 2007 11:18 AM
>>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>>
>>>>
>>>> Hi Jean,
>>>>
>>>> I suspect the reason you didn't get an answer before was
>>>> that your message was rejected due to the list message size
>>>> limitation of 20k. Your graphics alone come to 27k.
>>>>
>>>> I know you should technically be able to have JAWS 6.2
>>>> running, but 7.0 or 7.1 is recommended by Dancing Dots. (See
>>>> http://www.dancingdots.com/support/supportcaketalking5.htm
>>>> for details)
>>>>
>>>> Can you also check the version of CakeTalking? You should
>>>> have 5.2.
>>>>
>>>> George.
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
>>>> Montebello
>>>> Sent: 27 April 2007 15:47
>>>> To: ddots-l@xxxxxxxxxxxxx
>>>> Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2
>>>>
>>>>
>>>>
>>>> Hello Everyone!
>>>> I have asked this question before but have never got an
>>>> answer!
>>>> I need to install CT 5.3 on Jaws 6.2 but the install doesn't
>>>> show it in the list box.
>>>> Only Jaws 8, 7.1 and 7.0 appear.
>>>> I have repaired Jaws 6.2 but it still doesnt show.
>>>> I really need to do this and would appreciate support on
>>>> this matter.
>>>> Best regards,
>>>> Jean
>>>>
>>>> Please visit my site at http://www.studiomontebello.com
>>>> You can also visit my girlfriend's art gallery at
>>>> http://www.marie-helenemasse.com
>>>>
>>>> ** To leave the list, click on the immediately-following
>>>> link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on
>>>> the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>> ** To leave the list, click on the immediately-following
>>>> link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on
>>>> the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
