[ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 30 Apr 2007 19:01:33 -0400
Hey Gordon!
I'm a bit confused with your answer but I realize that it's my own fault as
there was a typo in my post.
It should have read "Jaws 6.2" instead of Sonar 6.2!!!
But your answer is nevertheless very interesting indeed.
I thought I had resolved the sluggishness issue in Sonar 6.2 by removing the
X-Ray option but to my great surprise, the very next morning the problem came
back almost as bad.
It's hard to believe that the problem is with Sonar because when I run it
without Jaws everything is perfect.
Even running with Jaws without CT or J Sonar is perfect.
Is this memory leakeage affecting only those of us using scripts?
To me, there seem to be nothing wrong with Sonar 6.2 if you run it without
scripts, CT or J Sonar!
If my diagnostic is wright, do you think that Twelve tones and maybe Dancing
Dots will give us an upgrade free?<grin>.
Thanks for taking this up for me.
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, April 30, 2007 10:34 AM
Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
> Jean:
> Well, of course you should be entitled to use what you want, but I will tell
> you this, and this is right from the horse's mouth (fs). There were memory
> leak issues with jaws 6.2 that did degrade performance with Sonar over time.
> These were resolved in version 7. I don't want you to think I'm just
> telling you this to pass the buck, but it is a reality. But I will see if I
> can get to the bottom of this for you.
> Gord
> ----- Original Message -----
> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, April 30, 2007 7:44 AM
> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>
>
> Hey Gord!
> Can you check on this?
> I'd still like to use Jaws 6.2 with CT 5.
> Jean
>
> Please visit my site at http://www.studiomontebello.com
> You can also visit my girlfriend's art gallery at
> http://www.marie-helenemasse.com
>
> ----- Original Message -----
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Sunday, April 29, 2007 11:18 PM
> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>
>
>> Well, I have a theory about this. I did have jaws 6.2 on my system as
>> well
>> as 7 7.1 and 8. I am wondering if the installer can only see three
>> versions
>> of jaws at once.
>> Gord
>> ----- Original Message -----
>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Sunday, April 29, 2007 6:52 PM
>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>
>>
>> Hey Gord!
>> That's pretty much what I'm doing now.
>> It's not really a big deal as I am using sonar 6.2 for J Sonar 5.
>> But, I'm still puzzled as to why I can't reinstall CT 5 in Jaws 6.2
>> because
>> that's where it was before I unstalled it?
>> Surely at some point the installer could see Jaws 6.2 and it doesn't no
>> more.
>> Go figure?
>>
>> Jean
>>
>> Please visit my site at http://www.studiomontebello.com
>> You can also visit my girlfriend's art gallery at
>> http://www.marie-helenemasse.com
>>
>> ----- Original Message -----
>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Sunday, April 29, 2007 6:36 PM
>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>
>>
>>> Jean:
>>> If you have three versions of jaws on your system, why not use one for
>>> ct6,
>>> one for jSonar, and the other for ct5? You could run ct5 under jaws 7
>>> for
>>> example.
>>> Gord
>>> ----- Original Message -----
>>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Friday, April 27, 2007 4:48 PM
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>> Hey George!
>>> Sorry about the confusion but all I want to do is to be able to install
>>> the
>>> CT 5.3 scripts on Jaws 6.2 as they were before I unstalled them.
>>> I have Sonar 6 installed with the appropriate scripts but am not willing
>>> to
>>> work with it for now. I'm only experimenting with sonar 6 for the time
>>> being!
>>> And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the scripts, both
>>> CT
>>> and J Sonar.
>>> Jean
>>>
>>> Please visit my site at http://www.studiomontebello.com
>>> You can also visit my girlfriend's art gallery at
>>> http://www.marie-helenemasse.com
>>>
>>> ----- Original Message -----
>>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Friday, April 27, 2007 2:42 PM
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>> Hi Jean,
>>>
>>> (Your message only got through because I manually approved
>>> it - and then changed the format to plain text to remove the
>>> graphics)
>>>
>>> I'm getting a bit confused here.
>>>
>>> What version of CakeTalking for Sonar do you actually want
>>> to run?
>>>
>>> If you already have the latest Sonar 6.#, I would suggest
>>> you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#.
>>>
>>> It is much easier to support the newest versions.
>>>
>>> George.
>>>
>>> -----Original Message-----
>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
>>> Montebello
>>> Sent: 27 April 2007 17:22
>>> To: ddots-l@xxxxxxxxxxxxx
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>> Hey George!
>>> OK for the graphics, but this one seems to have gotten thru?
>>> I need to install CT 3 5.2 or 5.3 on Jaws 6.2 because I'm
>>> already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6
>>> and J Sonar 6.
>>> At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to
>>> free it up for Sonar 6.2.
>>> When I installed Jaws 8 on my machine, I uninstalled CT 5.3
>>> from Jaws 6.2 to put it on Jaws 8 and since then, I am no
>>> longer able to reinstall it to Jaws 6.2!
>>> It worked really well with Jaws 6.2 and I guess I should
>>> have let it alone.<grin>!!!
>>> So, that's the deal!
>>> Jean
>>>
>>> Please visit my site at http://www.studiomontebello.com
>>> You can also visit my girlfriend's art gallery at
>>> http://www.marie-helenemasse.com
>>>
>>> ----- Original Message -----
>>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Friday, April 27, 2007 11:18 AM
>>> Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>> Hi Jean,
>>>
>>> I suspect the reason you didn't get an answer before was
>>> that your message was rejected due to the list message size
>>> limitation of 20k. Your graphics alone come to 27k.
>>>
>>> I know you should technically be able to have JAWS 6.2
>>> running, but 7.0 or 7.1 is recommended by Dancing Dots. (See
>>> http://www.dancingdots.com/support/supportcaketalking5.htm
>>> for details)
>>>
>>> Can you also check the version of CakeTalking? You should
>>> have 5.2.
>>>
>>> George.
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio
>>> Montebello
>>> Sent: 27 April 2007 15:47
>>> To: ddots-l@xxxxxxxxxxxxx
>>> Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2
>>>
>>>
>>>
>>> Hello Everyone!
>>> I have asked this question before but have never got an
>>> answer!
>>> I need to install CT 5.3 on Jaws 6.2 but the install doesn't
>>> show it in the list box.
>>> Only Jaws 8, 7.1 and 7.0 appear.
>>> I have repaired Jaws 6.2 but it still doesnt show.
>>> I really need to do this and would appreciate support on
>>> this matter.
>>> Best regards,
>>> Jean
>>>
>>> Please visit my site at http://www.studiomontebello.com
>>> You can also visit my girlfriend's art gallery at
>>> http://www.marie-helenemasse.com
>>>
>>> ** To leave the list, click on the immediately-following
>>> link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on
>>> the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>> ** To leave the list, click on the immediately-following
>>> link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on
>>> the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: