It's not really a big deal as I am using sonar 6.2 for J Sonar 5. Jean, is that what you really meant or was it a typing mistake. JSonar 5 isn't designed to work with sonar 6.2. You need the daily snapshots. On 29/04/07, Studio Montebello <studiomontebello@xxxxxxxxxxxx> wrote:
Hey Gord! That's pretty much what I'm doing now. It's not really a big deal as I am using sonar 6.2 for J Sonar 5. But, I'm still puzzled as to why I can't reinstall CT 5 in Jaws 6.2 because that's where it was before I unstalled it? Surely at some point the installer could see Jaws 6.2 and it doesn't no more. Go figure? Jean Please visit my site at http://www.studiomontebello.com You can also visit my girlfriend's art gallery at http://www.marie-helenemasse.com ----- Original Message ----- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 29, 2007 6:36 PM Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 > Jean: > If you have three versions of jaws on your system, why not use one for ct6, > one for jSonar, and the other for ct5? You could run ct5 under jaws 7 for > example. > Gord > ----- Original Message ----- > From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Friday, April 27, 2007 4:48 PM > Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 > > > Hey George! > Sorry about the confusion but all I want to do is to be able to install the > CT 5.3 scripts on Jaws 6.2 as they were before I unstalled them. > I have Sonar 6 installed with the appropriate scripts but am not willing to > work with it for now. I'm only experimenting with sonar 6 for the time > being! > And, my jaws 8,7.1 and 7.0 are all taken by Sonar 6 and the scripts, both CT > and J Sonar. > Jean > > Please visit my site at http://www.studiomontebello.com > You can also visit my girlfriend's art gallery at > http://www.marie-helenemasse.com > > ----- Original Message ----- > From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Friday, April 27, 2007 2:42 PM > Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 > > > Hi Jean, > > (Your message only got through because I manually approved > it - and then changed the format to plain text to remove the > graphics) > > I'm getting a bit confused here. > > What version of CakeTalking for Sonar do you actually want > to run? > > If you already have the latest Sonar 6.#, I would suggest > you stay with that, CakeTalking for Sonar 6.#, and JAWS 8.#. > > It is much easier to support the newest versions. > > George. > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio > Montebello > Sent: 27 April 2007 17:22 > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 > > Hey George! > OK for the graphics, but this one seems to have gotten thru? > I need to install CT 3 5.2 or 5.3 on Jaws 6.2 because I'm > already using Jaws 7.0, 7.1 and 8.0 for Sonar 6 with CT 6 > and J Sonar 6. > At the moment, I'm using CT 5.3 with Jaws 8.0 but I want to > free it up for Sonar 6.2. > When I installed Jaws 8 on my machine, I uninstalled CT 5.3 > from Jaws 6.2 to put it on Jaws 8 and since then, I am no > longer able to reinstall it to Jaws 6.2! > It worked really well with Jaws 6.2 and I guess I should > have let it alone.<grin>!!! > So, that's the deal! > Jean > > Please visit my site at http://www.studiomontebello.com > You can also visit my girlfriend's art gallery at > http://www.marie-helenemasse.com > > ----- Original Message ----- > From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Friday, April 27, 2007 11:18 AM > Subject: [ddots-l] Re: Installation of CT 5.3 on Jaws 6.2 > > > Hi Jean, > > I suspect the reason you didn't get an answer before was > that your message was rejected due to the list message size > limitation of 20k. Your graphics alone come to 27k. > > I know you should technically be able to have JAWS 6.2 > running, but 7.0 or 7.1 is recommended by Dancing Dots. (See > http://www.dancingdots.com/support/supportcaketalking5.htm > for details) > > Can you also check the version of CakeTalking? You should > have 5.2. > > George. > > > > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx > [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio > Montebello > Sent: 27 April 2007 15:47 > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Installation of CT 5.3 on Jaws 6.2 > > > > Hello Everyone! > I have asked this question before but have never got an > answer! > I need to install CT 5.3 on Jaws 6.2 but the install doesn't > show it in the list box. > Only Jaws 8, 7.1 and 7.0 appear. > I have repaired Jaws 6.2 but it still doesnt show. > I really need to do this and would appreciate support on > this matter. > Best regards, > Jean > > Please visit my site at http://www.studiomontebello.com > You can also visit my girlfriend's art gallery at > http://www.marie-helenemasse.com > > ** To leave the list, click on the immediately-following > link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on > the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following > link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on > the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
-- http://www.theyounguns.co.uk http://www.myspace.com/davideagleradio ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq