[ddots-l] Re: Inserting soft synths
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 13 Jul 2007 07:03:54 -0400
I'm glad that you have qualified your statement Gord! <grin>.
Jean
Please visit my site at http://www.studiomontebello.com
You can also visit my girlfriend's art gallery at
http://www.marie-helenemasse.com
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, July 12, 2007 11:17 PM
Subject: [ddots-l] Re: Inserting soft synths
> Well, I have the original 2408 with the pci324 card, about 7 years old or
> so. Probably the newer drivers are really meant to support the newer
> hardware.
> Gord
> ----- Original Message -----
> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, July 12, 2007 8:23 PM
> Subject: [ddots-l] Re: Inserting soft synths
>
>
> That's pretty strange because that's exactly what I have...
> 2 MOTU 2408 with the PCI-E 424 card.
> And, the WDM drivers do work much better than the ASIO drivers.
> At least on my system which is anIntel Core 2 Duo.
>
> Jean
>
> Please visit my site at http://www.studiomontebello.com
> You can also visit my girlfriend's art gallery at
> http://www.marie-helenemasse.com
>
> ----- Original Message -----
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, July 12, 2007 7:50 PM
> Subject: [ddots-l] Re: Inserting soft synths
>
>
>> Well, unfortunately, the wdm drivers don't work well with the MOTU 2408
>> which is what I'm using.
>> Gord
>> ----- Original Message -----
>> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Tuesday, July 10, 2007 1:19 AM
>> Subject: [ddots-l] Re: Inserting soft synths
>>
>>
>> Yes, but you only have to set it once!!!
>> After that, all you need to do is to change the buffer size within Sonar.
>> On my system, I find I'm getting lower latency using the WDM driver. Plus
>> the added bonus of being able to run multiple sound cards...Handy when you
>> quickly want to listen to your mix on the computer's speakers for
>> instance.
>>
>> Jean
>>
>> Please visit my site at http://www.studiomontebello.com
>> You can also visit my girlfriend's art gallery at
>> http://www.marie-helenemasse.com
>>
>> ----- Original Message -----
>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Monday, July 09, 2007 10:21 PM
>> Subject: [ddots-l] Re: Inserting soft synths
>>
>>
>>> Even if you choose the wdm driver, you still will need to set the buffers
>>> in
>>> the delta control pannel in the hardware tab.
>>> Gord
>>> ----- Original Message -----
>>> From: "Luis Elorza" <luiselorza@xxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Thursday, July 05, 2007 9:01 PM
>>> Subject: [ddots-l] Re: Inserting soft synths
>>>
>>>
>>>> the reccomended latency setting is around 128with asio.
>>>> and with wdm you can use the buffer size slider . why don't you try
>>>> changing to wdm in the options\audio\advanced\driver mode , and then
>>>> running the sonar's wave profile.
>>>> and see what happens.
>>>>
>>>> ----- Original Message -----
>>>> From: "Jim Jackson" <cs2007@xxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Thursday, July 05, 2007 5:42 PM
>>>> Subject: [ddots-l] Re: Inserting soft synths
>>>>
>>>>
>>>> Sound card is the delta 10/10. Bob, I tried to set the buffer size to 0
>>>> and
>>>> it wouldn't allow it.
>>>>
>>>> -----Original Message-----
>>>> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>>>> On
>>>> Behalf Of Luis Elorza
>>>> Sent: Thursday, July 05, 2007 7:55 PM
>>>> To: ddots-l@xxxxxxxxxxxxx
>>>> Subject: [ddots-l] Re: Inserting soft synths
>>>>
>>>> what soundcard are you using?
>>>> are you sure it supports low latency?
>>>>
>>>> ----- Original Message -----
>>>> From: "Jim Jackson" <cs2007@xxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Thursday, July 05, 2007 4:13 PM
>>>> Subject: [ddots-l] Re: Inserting soft synths
>>>>
>>>>
>>>> I've tried acio and the playback Q is at 2 already. I haven't tried
>>>> using
>>>> Sonar 4 however. You said something about buffers, is that not the same
>>>> as
>>>> the buffer size?
>>>>
>>>> -----Original Message-----
>>>> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>>>> On
>>>> Behalf Of Luis Elorza
>>>> Sent: Thursday, July 05, 2007 7:05 PM
>>>> To: ddots-l@xxxxxxxxxxxxx
>>>> Subject: [ddots-l] Re: Inserting soft synths
>>>>
>>>> is your sonar 4 working right now in that same machine? what soundcard
>>>> are
>>>> you using?
>>>> did you try both wdm and asio drivers?
>>>> also check buffers in playback cue.set it at 2.
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Jim Jackson" <cs2007@xxxxxxxxx>
>>>> To: <ddots-l@xxxxxxxxxxxxx>
>>>> Sent: Thursday, July 05, 2007 2:29 PM
>>>> Subject: [ddots-l] Inserting soft synths
>>>>
>>>>
>>>> Hello all, I've attempted to insert the session drummer as well as the
>>>> Cakewalk tts (I believe it's called), and with both I get the same
>>>> response.
>>>> When I press the keys on my keyboard I get delay. I've played around
>>>> with
>>>> the buffer size adjusting it down to about and eight and still no
>>>> success.
>>>> I'm using Sonar producer 6.2 and CT 6.2.4; I could use the TTS just fine
>>>> with Sonar 4 producer. Can anyone, someone, please help me with this
>>>> problem? Thanks
>>>>
>>>>
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.476 / Virus Database: 269.10.0/886 - Release Date: 7/4/2007
>>>> 1:40 PM
>>>>
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.476 / Virus Database: 269.10.0/886 - Release Date: 7/4/2007
>>>> 1:40 PM
>>>>
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.476 / Virus Database: 269.10.0/886 - Release Date: 7/4/2007
>>>> 1:40 PM
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.476 / Virus Database: 269.10.0/886 - Release Date: 7/4/2007
>>>> 1:40 PM
>>>>
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.476 / Virus Database: 269.10.0/886 - Release Date: 7/4/2007
>>>> 1:40 PM
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>>>> ** or send a message, to
>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** ddots-l-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>>>> Subject:- faq
>>>>
>>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
