[ddots-l] Re: Inquiry: DP and CT not integrated?
- From: Herman Fermin <hermanfermin@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Wed, 25 Apr 2012 16:36:00 -0400
Are you using 32-bit or 64-bit?
HF
On 4/25/12, Efren Chavez <efrenchavez91@xxxxxxxxx> wrote:
> Give it a second. Try controll Y on the track that has dempro on it
> then hit f4. Also, I think when you insert the soft synth, You have to
> make sure the synth rack view doesn't open up. (so uncheck that)
>
> On 4/25/12, Bobbi Blood <phantomess666@xxxxxxxxxxx> wrote:
>> I am aware of this, but as I said, f4 tells me that there is no options
>> dialogue for this view. I did try just pressing F4 after Dim Pro was
>> open
>> and got the same message. So I'm not sure what to do at present.
>>
>> Most Sincerely,
>>
>> Bobbi
>>
>> --------------------------------------------------
>> From: "Jack Conti" <jackconti@xxxxxxx>
>> Sent: Wednesday, April 25, 2012 1:12 PM
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Subject: [ddots-l] Re: Inquiry: DP and CT not integrated?
>>
>>> i just use f4, and all you need is there. once you do f4 you should be
>>> able to load a program and more.
>>> At 03:05 PM 4/25/2012, you wrote:
>>>>Hello List,
>>>>
>>>>I've finally gotten Dim Pro registered and was really excited to begin
>>>>working with it. However, I'm confused as to why CT says it supports
>>>> it.
>>>>
>>>>I read up in the supported Soft Synths document and tried to do the
>>>> first
>>>>
>>>>step of opening Dim pro and bringing up the options dialogue.
>>>>
>>>>In the presets area, I got a message saying that the parameters of the
>>>>area haven't been scripted for. I bounced to the parameters with F6 and
>>>>received no feedback whatsoever when tabbing/arrowing around. So I
>>>>bounced back and pressed F4 to bring up the options dialogue.
>>>>
>>>>I was then told that there was no options dialogue for the view I was
>>>> on.
>>>>
>>>>I'm completely and utterly confused now. Why wouldn't CT be working
>>>>properly as advertised here? I'm running JAWS 10 and not 11, would that
>>>>be the issue? I don't see how, quite frankly, but at least I'll know
>>>> what
>>>>
>>>>it is if indeed that's the case. But I'm not about to uninstall
>>>> anything
>>>>
>>>>only to find out that my probable fix didn't work.
>>>>
>>>>What do you guys think? I know I could get the HSC sets for it but why
>>>>get the sets if CT supports DP natively? Needless to say, I'm a bit
>>>>disappointed at this stage... LOL
>>>>
>>>>Anyway thanks for reading. This one's not gonna be one of those
>>>> questions
>>>>
>>>>I can answer on my own.
>>>>
>>>>Is there a way to see what version of DP I'm running? I don't know if
>>>>it's 1.0, 1.2 or what. I'm running Windows vista 64 bit and JAWS 10
>>>> with
>>>>
>>>>CT 8.5, and Sonar 8.5.3 producer edition. Everything up to this point
>>>> has
>>>>
>>>>worked how I expected it to. Suggestions welcome and thanks again!
>>>>
>>>>Most Sincerely,
>>>>
>>>>Bobbi
>>>
>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode, click on the immediately
>>> following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>> send a message, to ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> faq
>>>
>>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
>
>
> --
> Efren Chavez
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
