Chris! I will try to record some MIDI data a bit later on and see if I experience the problem that you are describing. Regards, Phil Muir P J Muir Productions URL: www.philmuir.com/ ----- Original Message ----- From: "Christopher Bartlett" <cwbtt@xxxxxxxxxxxxx> To: "ddots-l-freelists.org" <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, July 31, 2005 7:06 AM Subject: [ddots-l] Help, installed Sonar 4.03 and now nothing is playing. > I just installed the Sonar Producer patches to upgrade from 4.01 to 4.02, > then 4.03. Now, when I load a project that was playing just fine, every > time I hit play, JAWS reports "Return to beginning". If I hit record on a > MIDI track, JAwS reports "Out of record"> Sonar will no longer play either > MIDI or Audio tracks. > > 1. I have checked all cabling, and so far as I can see, it's correct. > > 2. I checked to make sure all devices were selected, as when I originally > ran Sonar 4.03, all my MIDI devices were unselected. I have made sure my > m-audio module is selected. there appears to be a new entry for the > M-audio USB key station, which I selected as well during one my efforts to > troubleshoot the problem. > > 3. I reinstalled the cCakeTalking scripts. > > None of these things has made any difference. Sonar appears to be seeing > my audio and MIDI hardware, but it is unable to play or record through > it. Is there some quirk about the 4.03 patch that I don't know about? > > Chris Bartlett > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq